RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Revo (https://www.rc-monster.com/forum/forumdisplay.php?f=24)
-   -   My e-revo brushless edition build (https://www.rc-monster.com/forum/showthread.php?t=20864)

rawfuls 07.23.2009 05:27 PM

New Zippys?

Link?

I got my Turnigy's awhile ago, but have been waiting for my powerpoles to come...

mistercrash 07.23.2009 07:41 PM

Quote:

Originally Posted by mopar1994 (Post 306869)
pic still no worky

Grrrr..... Any of these work? The link for the new Zippys is in the post above, just click on it.

http://i177.photobucket.com/albums/w..._template1.jpg

http://i177.photobucket.com/albums/w..._template1.jpg

Template

http://i177.photobucket.com/albums/w..._template1.jpg

rawfuls 07.23.2009 08:03 PM

Both of the posts worked...

rawfuls 07.23.2009 08:04 PM

The hardcased? They want $20 for a a case? =/

mistercrash 07.23.2009 10:58 PM

These are the new hardcase Zippy Flightmax

http://hobbycity.com/hobbycity/store..._hardcase_pack

revo guy 07.23.2009 11:39 PM

Quote:

Originally Posted by rawfuls (Post 306943)
The hardcased? They want $20 for a a case? =/

Actually the prices are (not signed in)

ZIPPY Flightmax 5000mAh 2S1P 20C $28.84

ZIPPY Flightmax 5000mAh 2S1P 20C hardcase pack $33.57

ZIPPY Flightmax 5000mAh 2S1P 30C hardcase pack $46.69


So the case is only and extra $5

rawfuls 07.24.2009 10:54 AM

Ah, I usually don't sign in until I am going to check out.

Dang, $33.57, I may have to pick some up now..

shaunjohnson 07.25.2009 05:30 AM

Quote:

Originally Posted by rawfuls (Post 307117)
Ah, I usually don't sign in until I am going to check out.

Dang, $33.57, I may have to pick some up now..

go for the 30C...trust me:wink:
if they fit that is.
yeah i guess we do drive the same hehe.
that was my old nitro revo in that pic...i'll update that avvy when todays race photo's come through.

no ive never bent mine at all...it'd be interesting if we could swap revo's for a race...too bad there is a long distance between us :(
maby you could try the E-maxx plate? you'd have to spin the tranny 180 and in theroy it should be a bad thing in a race CoG wise....but it'd be interesting nonetheless

Jason 07.25.2009 06:00 AM

mistercrash : the trick for diff block dont work with the stock e-revo diff I put the complete diff in a birthday balloon and then put in into the bulkhead and seem more tight then before should work just fine ? ... I cut 3 holes for the diff output ... and checked my diff pinion and ring gear look like brand new and the pinion dont needed to be shimmed and I dont got any move side by side with the diff case too.. but once I opened the diff the seal were the screw goes was broke so the diff leak but not by alot anyways im going to buy a seal and change the diff fluid one day.. and I forget the bearing was all fine ;)

mistercrash 07.25.2009 10:30 AM

Quessé t'as fait là toé sti! Mette té diffs dans dé balounes :mdr: Pourquoi pas du glaçage à gâteau dans l'diff tant qu'à y être :tongue: C't'une joke là :yes: Bin si ça marche çé tant mieux.

Jason 07.25.2009 10:35 AM

un plan de neye comme quon dit :)

j'ai défait le diff avant aussi pis lui pas eu besoin de rien toucher il est parfaitement tight cétait seulement lui d'en arriere qui avait un lousse

dave_mackinnon 07.25.2009 02:33 PM

Bibliotheque!

Hahha.. Sorry, had to do that...

Hey mistercrash, where did you get the piano wire?

OK, so, who's up for placing an order for Lipo's? Maybe I'll start a new thread?

jpoprock 07.25.2009 03:15 PM

Dave... I'm down! I need 4 or more. 4 for sure.

mistercrash 07.25.2009 08:17 PM

Quote:

Originally Posted by dave_mackinnon (Post 307458)
Bibliotheque!

Hahha.. Sorry, had to do that...

Hey mistercrash, where did you get the piano wire?

The wires I have were available at my LHS in the airplane section. But I found this also. I ordered a pack of ten 18'' rods to try out.

http://www.smallparts.com/Music-Wire...AF&pf_rd_t=301

dave_mackinnon 07.25.2009 09:47 PM

Thanks mistercrash...

Weather isn't looking too good for the race tomorrow.. calling for showers in the morning and afternoon...


All times are GMT -4. The time now is 07:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.