![]() |
Quote:
|
Naah its never drunk, and a good driver:D Unlike me -.- :lol:
|
Quote:
|
If all you have are hot pink spur gears I'll take one, my Ten is ready to roll.
|
Quote:
|
Brian, what do you estimate the top speed is on your truck with your setup? I have decided to base my conversion on yours. I am new to this and I want to get it right the first time around. The only thing I may change is the Tekin RX8 combo due to cost (any suggestions for a cheaper alternative?) or is it basically you get what you pay for. I hope you don't mind.
I tried your Top Speed Calculator but there was too many values that I did not know the answers to. |
My Mamba is waiting :lol:
Tom |
Quote:
This is what I get for my setup: Differential Ratio: 3.888888888888889 Transmission Ratio: 1 Other Ratio: 1 Spur Tooth Count: 52 Pinion Tooth Count: 20 Total Voltage: 14.8 Motor KV: 1900 Tire Diameter (inches): 4.1 Tire Ballooning (inches): 0 Motor Current Draw: 0 Motor Coil Resistance: 0 Spur/Pinion Ratio: 2.6 : 1 Total Ratio: 10.11111 : 1 Tire Circumference (inches): 12.88 inches (327.17 mm) Rollout: 1.27:1 Total Motor Speed: 28120 RPM Vehicle Speed: 33.92 mph (54.49 km/h) Effective KV Value: 1900 KT constant: 0.71 oz-in/A Motor Torque: Amperage not specified... Final Torque: Amperage not specified... Final Power: Amperage not specified... |
Tommorow is no longer good friday,Im thinking it should be called hurry up and order your ten-t conversion kit so you have it for next weekend day.:yipi:What ya think umumumummmmmike?:lol: White,Black,Pink spurs ne
vermind not pink. White,or black no pokadots please.654321MOLLER |
Hmm - my stock tires are 4.5" tall and I figure they are good for at least .1" ballooning. I suspect the actual speed with your setup(BrianG) - which happens to be the same as mine - will be around 40mph.
Spurs(white - sorry I couldn't find pink with flowers) won't be ready until Saturday, so Good Friday can be reinstated. |
Wow!! I beat moller to the first post after mike anouncement of when the kit will be ready!!!!!....(jk bro ;)...anyways...great news mike!!! And for all of you ten-t owners....what diff fluids are you using??? I just switches mine to 5k in rear and 7k in front...planning 10k in center.....planning on 2650kv on 4s or 3s....
|
I'm using whatever it came with, but I plan to use 100k in the center with 5k rear and 7k front. BTW: 100k is not a typo. :smile:
A 2650kv motor on 4s would be ballistic unless you gear down a lot. 3s would be more driveable. I ran for 30 minutes straight on a 5Ah 4s pack with my Tekin 1900kv (buggy) system (geared 52/20) at the track tonight. |
i look every houre in the shop
i hope i´ll be the first that orders the kit :lol: thanks tom sorry for my english i´m from austria :angel: |
You can't be the first, because I was. :na:
|
100K:surprised:....you looking to do standing back flips brian????...lol....anyways...im using a 2650kv motor b/c i got a great deal on a MMM combo...i'm planning on gearing down...looking for about 40mph on the track....or maybe i'll sell this motor and get a lower KV one.....would 3s be ok to run the ten-t on a 2650kv motor????
|
| All times are GMT -4. The time now is 02:00 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.