RC-Monster Forums - mm still cogs like crazy w/my new NEU motor

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)

- - mm still cogs like crazy w/my new NEU motor (https://www.rc-monster.com/forum/showthread.php?t=13276)

What happened is that I got a MGM and a 1512 1YF. The mm esc is on the shelf for now. I also bought a v1 mmm esc that I am waiting for repair.

Quote:

Originally Posted by magman (Post 188188)

It is set to a low setting, I don't recall the value off the top off my head, but I will check later today. MY timing is set for 5 so maybe I will try to bump it up to between 8 and 10 and see what happens.

the Neu delta winds like the lowest advance possible "0" the wye winds you can go up to 10, I think your pack isnt up to snuff, I dont have any expierence with the Elite brand but if you may want to try a quality brand (Polyquest, Neu, Flightpower/Thunderpower) it sounds like your motor is asking for more power when you go WOT and the pack cant deliver...the 1.5d is a amp hungry motor

I would try an to use a seperate receiver pack just to see if it resolves the issue.
or Could it be LVC??

Highflier

I think it has internal issues...

Quote:

Originally Posted by highflier (Post 203128)

I would try an to use a seperate receiver pack just to see if it resolves the issue.
or Could it be LVC??

Highflier

if it is the LVC that would be a problem with the pack...it wasnt holding the voltage like it should setting off the LVC