Nice ride. There are a lot of x1 crts out there.:smile: Mine came with a six gear spider diff with a 52t spur. Not sure if I can change it so I am running it. Good luck with your build. Also I fit a traxxas water proof reciever box where your reciever is.I used a e maxx one but think the slash one is a little smaller. Drilled and tapped the servo plate.

sweet thats good to hear if you need any help dont hesitate to get ahold of me i can help you get it straightend out

gonna need a custom battery tray from mike and i already ordered the zippy 5000mah 5s pack witch is 160 x 51 x 40mm and i dont want to mount it on its side how big should i have him make the tray? also the .25 cut out on the bottom of the tray is that to go over the mud gaurds or just so u can mount it close to the lip. am also looking for the side mudgaurds but can not find them anywhere. can anyone help?

That chassis is so wide it does'nt use them. You could make some fit I guess if you really wanted them. Or do a x2 chassis conversion also. I would have but mine has the 7075 pro chassis. Maybe if I bend it.

ok was just wondering if they were made for it as i sw the mounting holes

This http://www.rcproductdesigns.com/imag...op%20Plate.jpg ex1cr top plate from here http://www.rcproductdesigns.com/EigthScaleParts.htm will alow you to mount the esc over and behind the center diff and get the esc out of dirt. See http://www.rcproductdesigns.com/Jammin%20index.htm I like mine. Keeps the esc high and dry. Raises the COG a bit but I like the esc out of the way. It is the plate on top. The motor mount is seperate.

CRTIM has a nice pic of it mounted. http://www.rc-monster.com/forum/showthread.php?t=16827

ty thats a sweet idea
plus i think im gonna need the room for the battery its 160x50

i have a tray for you hold on.....

http://www.neweramodels.com/item.cgi?part_id=1952

its 51 mm wide, i have one on my crt and it is perfect width for the zippys, i drilled and tapped my chassis and used countersunk screws to hold it down

i like how it looks what is the length of this tray?

i think it might be perfect, but i opened the one end of it, since the strap holds the baterry really, i also put some velcro in the bottom, ill get a pic of it mounted in my car

that would be great

http://i37.tinypic.com/349c3e8.jpg

http://i35.tinypic.com/2wcirlx.jpg

cool looks like that will work just fine for me

yup that is the 4s 4000 zippy-h those are great packs~!