RC-Monster Forums - Noob 8XL & 9920 Questions

Page 2 of 2

Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)

- - Noob 8XL & 9920 Questions (https://www.rc-monster.com/forum/showthread.php?t=2002)

squeeforever

01.12.2006 06:20 PM

weres a good place to start for gearing on a 8xl on 16 cells? also, i have heard people using the stock bec on 18 cells with out problems although i know its not recommended would 16 be ok ya think?

coolhandcountry

01.12.2006 09:13 PM

I tried on 14 and it cut out. It seems to produce better power with ubec for some reason

Scott711

01.12.2006 10:01 PM

Quote:

Originally posted by maxxdude1234
The manual from the uBEC says: 'If mounting near electronics, place flat side of BEC toward the other items for maximum shielding.'

Okay, I see what they are doing. Just using the PSB for a little extra shielding in tight spaces. Thankfully I have enough space to locate it away from the esc, servos and RX. Thanks

All times are GMT -4. The time now is 09:47 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page