I say skip the expensive spool and just rip the balls out! It'll work just as good.:whistle:

use 2 part epoxy. smother all the internals- then clamp it together- that was my method on locking a ball diff- had to take it apart with a really big hammer.

What's wrong with taking the balls out and tightening it down like a mofo? C'mon, my ways the best.:na:

Use mighty putty, it has the power to do the job right! :rules: :yes:

HE GOT SMOKED!! Lol. I got it on video and I'll post it asap. I have a paper due tonight so I can't post it right now. He's moving up to the 3.3 motor now to see if that will get him a win next time.

lol, not surprising. I can't imagine the size Nitro motor required to compete with a good BL setup.

I can't even hold you up like that... I'm uploading it now!!

HERE'S A QUICK PEEP AT IT...
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/oQTPDsD07iU&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/oQTPDsD07iU&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

Pwnage. :mdr:

That's always fun! I raced a nitro Savage once with my bl-E-maxx. I stayed with him at half-throttle for a while, then wheelied as I passed him just for effect. :-)

Nice win!

You Took A DUMP on His Lid For Sure.

What's really funny is my servo saver was loose so I couldn't go full throttle until about 1/3 of the track was gone. If I could have opened up from the starting line... LIGHTS OUT! LOL.