RC-Monster Forums
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   Need help setting up a Genesis (https://www.rc-monster.com/forum/showthread.php?t=22075)

93firebird 07.22.2009 09:21 PM
Quote:
Originally Posted by suicideneil (Post 305934)
Reduce brake strength to prevent endos, but its only at 25% correct? Sounds like you have it set for forwards-brake-reverse (near 0 rpms); you need to change that to forwards-brake-reverse with lockout (so it will only go to reverse once you've stopped, released the throttle, then re-engage reverse).
Thanks that fixed the brake issue.

On another note the truck did something that I totally would not expect it to do, especially on just 4S... it did a standing back flip for me. :surprised: I could not get it to do it again but I will try to get a video this weekend of it running.

93firebird 07.22.2009 09:39 PM
2 Attachment(s)
here are a couple pics of the truck

BL_RV0 07.22.2009 09:54 PM
Looks good except for that damn MA pack. Get a good 5S pack and you'll be in business.

93firebird 07.22.2009 09:57 PM
Quote:
Originally Posted by BL_RV0 (Post 306670)
Looks good except for that damn MA pack. Get a good 5S pack and you'll be in business.
It's about all I wanna handle with the 4s pack now I don't want to think of what 5s would do. I adjusted the throttle curve and still can't keep the front wheels on the ground.

BL_RV0 07.22.2009 10:09 PM
That's a good thing! :lol:

93firebird 07.26.2009 06:34 PM
Here are some videos of the truck running. Sorry for the low quality!!
http://www.youtube.com/watch?v=oTZ4JxHet8Y
http://www.youtube.com/watch?v=AyE9KOKQN8k
http://www.youtube.com/watch?v=9JA_2tS4Jzo

Bondonutz 07.26.2009 07:03 PM
The third video was funny, I think we've all done that at one time or another.
Looks like she's running good for you, now go bash the crap out of it !

suicideneil 07.27.2009 08:45 AM
I lost a tire from the rim once, but never a whole wheel :lol:

Nice vids.

93firebird 08.01.2009 11:44 PM
A couple more videos from the same day
http://www.youtube.com/watch?v=ZYXC9wiXo0A
http://www.youtube.com/watch?v=RvmS8FqvBpI

Bondonutz 08.02.2009 08:10 AM
No wonder the wheel fell off, smacking that curb like that. OUCH. Made me cringe.

93firebird 08.02.2009 08:48 AM
Quote:
Originally Posted by Bondonutz (Post 309425)
No wonder the wheel fell off, smacking that curb like that. OUCH. Made me cringe.
The wheel came off because of the lack of loctite.

Bondonutz 08.02.2009 08:53 AM
Hmm, I have the same 23mm hubs on my LST2's and never used the stuff there,never had any probs.

aqwut 08.02.2009 10:26 AM
Great vids man... but stay away from the curbs... :)

93firebird 08.12.2010 09:24 PM
Anyone know where I can find hardened pins for the hubs as well as aluminum wheels to fit a 23mm hex. I just sheered a pin, cracked a hex, and twisted it in the wheel, all at once. Another loose wheel issue. Damn you torque you are now my enemy.:grrrrrr:

Arct1k 08.12.2010 09:37 PM
You could use drill blanks or piano wire...


All times are GMT -4. The time now is 06:12 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.