RC-Monster Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Revo (https://www.rc-monster.com/forum/forumdisplay.php?f=24)
-   -   Bleh ! (https://www.rc-monster.com/forum/showthread.php?t=25885)

Bondonutz 02.22.2010 01:13 PM
Quote:
Originally Posted by RC-Monster Mike (Post 351409)
In order to make the aluminum coupler work on the LST diff, the coupler needs to be reamed to 8mm all the way through and a new set screw threaded hole needs to be added(to the opposite side) to properly engage the pinion shaft. You can send them back to me for the modification if you like. :)
And the little lip on the diffs output shaft will need ground flush w/flat spot

RC-Monster Mike 02.22.2010 02:00 PM
Actually, you need a little lip to allow the inner and outer races to rotate independantly. Pretty sure I left the lip on yours, actually. :)

Deahttub 02.22.2010 03:48 PM
Quote:
Originally Posted by RC-Monster Mike (Post 351409)
In order to make the aluminum coupler work on the LST diff, the coupler needs to be reamed to 8mm all the way through and a new set screw threaded hole needs to be added(to the opposite side) to properly engage the pinion shaft. You can send them back to me for the modification if you like. :)
I'll send them in Mike...I think i ruined one (which I don't expect you to eat) if it isn't salvageable can you just charge me for a new one and make the mods on it?

Bondonutz 02.22.2010 03:48 PM
1 Attachment(s)
Quote:
Originally Posted by RC-Monster Mike (Post 351430)
Actually, you need a little lip to allow the inner and outer races to rotate independantly. Pretty sure I left the lip on yours, actually. :)
Sir, I'm refering to the 9mm shaft/outdrive on the XXl diff, Not your coupler.
Please see Pic

suicideneil 02.22.2010 11:49 PM
Thats the input shaft :mdr:

Deahttub 03.12.2010 09:48 PM
Quote:
Originally Posted by RC-Monster Mike (Post 351430)
Actually, you need a little lip to allow the inner and outer races to rotate independantly. Pretty sure I left the lip on yours, actually. :)
Mike,

I got the couplers back and they work PERFECTLY!!!!! Thanks for your help you are the best !!!!


Rich


All times are GMT -4. The time now is 09:44 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.