That would be a stonking setup, I'll see if I can find one.

2200kV with 5S geared a little lower than your current 2050kV with 5S would be the same speed setup no ?

the 1512 is just fine for a buggy. my medusa 60mm motor is smaller than that and it has no problem pushing my 10lb CEN matrix. there is no reason a 1512 wouldn't work, unless the buggy is geared for over 50mph.

Gotcha, will keep an eye on the MMM for now, the motor was fine never heated up. Will get a couple replacement fans to make sure when the MMM fan goes for real I will have something to replace it with.