RC-Monster Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   General Questions (https://www.rc-monster.com/forum/forumdisplay.php?f=7)
-   -   Major tire vibration (https://www.rc-monster.com/forum/showthread.php?t=3019)

Sylvester 05.01.2006 07:30 PM
With a hole that small, i dont think you should be worried about any rips or micro-scopic rocks getting in them;)

rcjmaxx 05.03.2006 05:51 AM
Quote:
Originally Posted by rcjmaxx
I bought a used OFNA Titan monster truck roller,after converting it to brushless I found that at about 30 mph it swirves sharply out of controll.Some suspension adjusting made a small difference.With the truck suspended and all 4 tire off the ground,I ran the rpm's up a little and you could see all 4 tires VIOLENTLY shaking and vibrating.I'm assuming the wheels/tires are out of balance...but at 30 mph? Am I assuming correctly? Is there a solution to this problem? Thanks in advance.
Yesterday I took the "bad" wheels and tires off of this truck and put them on an entirely different truck,the outcome......this different truck drove perfectly straight.No vibrating or swirving.Next will be checking/replacing the wheel bearings and on from there.Keep the advice coming. Thanks.

coolhandcountry 05.03.2006 10:10 AM
If that is the case you may check to see if the stub axles are bent. it would make it wobble and shimmy.


All times are GMT -4. The time now is 12:17 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.