The crap that is needed to keep the crap going..

I bought their liposhield.

Yup.. I edited my post to add a couple things I forgot. ha ha ha

Yeah, it's the easiest to make your controller/ubec/fans/LVC one device.

The Ubec/controller/lvc can combine the receiver wire. (it's not the 6V voltage that drops when the LVC 'kicks' in. the output of the ubec can be used to power 5/6V fans, and the input leads of the speedo can be used to take the measuring voltage from the LVC. that's what i thought about doing.. But you don't want to void any warranty, right?!

The gps is unneeded, since you got a GPS for your eagletree.. (not for the micro, though)

i noticed that when you go lipo...the mess of wires just increases.....hard to keep it clean looking

You can do, as i described in my post.. it will be clean.

i'll have to give that a try when i go lipo..thanks for the info serum...

You can do it without the LVC, works too..

Sorry my stupid questions, but what is LVC and what it's doing:007: ? Can I use UBEC and LVC same time in car?

read the sticky in the brushless section. (some information about brushless in general) And yes, you can use both at the same time.