Ok, 1 x trackpower 4900 for B4 w/ balancer adaptor, 1 x 6s1p4900 EVO20 pack for LSP, V-balancer and thats it... anything else?

I hope the lehner is ok on 6s.. 22.2*1867=41447 RPMs..

6S is quite ridiculous for racing/bashing.

Thats what i thought, thats why i went with the 5s1p 4350 lipo :) Nice in between setup, and still lighter than the 8000's. :)

Question, the Trakpower comes with the bullet connector with wires, right?!

Oh, I did not think you are going to race.

No, It does not. You need wires and connectors.

Link to those? I am partially racing more bashing.

Wires and connectors can be easily picked up from mike..:)

What are they, 4mm?

I recommend 5.5 connectors.

It's up to you by the way.

Do they fit into the slot of the Trakpower? Also what gold plugs does the V-balancer come with? thanks.

Oh yeah, they wont. Use the 4mm ones with 12Ga wires.

5.5mm should be used for the FlightPowers( less resistance).

Where can i get some 4mm's? Mike only has 3.5 and 5.5.

I think icare-rc.com has them. Also you can find them at towerhobbies.
You need connectors for the v-balancer, too.

Somthing like these? http://www.amainhobbies.com/product_...oducts_id/5257