RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   Charging problem (https://www.rc-monster.com/forum/showthread.php?t=7228)

jhautz 06.17.2007 11:07 PM

Quote:

Originally Posted by rchippie
Does it make a difference in performance if your lipo's are charged at a low amp rate, like it does with NIMH ?.

no .

rchippie 06.18.2007 01:56 PM

After using my lipo's & they cool off can i just put them back on the charger or do i have to do something else first ?.

jhautz 06.18.2007 02:02 PM

Just let them cool and charge them up.

rchippie 06.18.2007 02:14 PM

Quote:

Originally Posted by jhautz
Just let them cool and charge them up.


Thank's for answering my ?'s. 4S lipo seems to have as much if not more power & punch than the 14 IB 3800 cells i was running LOL :005: .

Serum 06.18.2007 02:25 PM

I stopped waiting for the balancer to stop blinking before i charge the packs; just charge them with the blinking lights, the balancing process goes faster when charging. (or you don't need to wait for it)

rchippie 06.18.2007 02:26 PM

Quote:

Originally Posted by Serum
I stopped waiting for the balancer to stop blinking before i charge the packs; just charge them with the blinking lights, the balancing process goes faster when charging. (or you don't need to wait for it)


Thank's for the tip rene. Did you find out if you had any of what we talked about ?.

Serum 06.18.2007 02:29 PM

not yet; what is your plan? perhaps i can make you something.

with you batteries Just tell them who's in charge.. (and with these words , the price for the 'worst joke of the day' is already taken by .....)

rchippie 06.18.2007 02:40 PM

Quote:

Originally Posted by Serum
not yet; what is your plan? perhaps i can make you something.

with you batteries Just tell them who's in charge.. (and with these words , the price for the 'worst joke of the day' is already taken by .....)

LMAO :005:

I'm making something very similar to what the mbx 4 had for a fan mount. I have exactly what i want made from aluminum but was going for the BLING BLING factor of CF LOL :005: .

It it a mount the looks like this with the fan mounted on the horizontal part & the vertical part is only about a 1/2 inch or so wide so i can mount it to the mount i made to connect it to my ESC mount. . The fan mount will screw to the reverse mount i made. I hope this makes sinice to you ?.

FAN
_______
l
l
l

Serum 06.18.2007 02:41 PM

I think i still have the mount you used.

rchippie 06.18.2007 02:46 PM

Quote:

Originally Posted by Serum
I think i still have the mount you used.


I already made another one of those in aluminum. I was thinking abount making one out of CF.

rchippie 06.18.2007 04:03 PM

Quote:

Originally Posted by Serum
I stopped waiting for the balancer to stop blinking before i charge the packs; just charge them with the blinking lights, the balancing process goes faster when charging. (or you don't need to wait for it)


i just talked to jack at HYPERION & he said there is no added benifit of balanacing my packs everytime (per say ). He also said i could make up a cable that goes from the charger straight to the battery, & charge them that way & balance every 4 or 5 charges. My ? is if i charge them without the balancer is it safe ?. He also said the battery would charge faster not being connected to the balancer. I dont think im comfortable doing that. Any thoughts ?.

BrianG 06.18.2007 05:44 PM

You are probably ok with not balancing everytime, but why not do it? It's not going to hurt anything and you can be sure that your pack will always be balanced. I balance while charging all the time. Any decrease in charge time by not using a balancer is negligible. Technically, since the bal does discharge at a low rate, charge time does increase, but is so small that it really is not worth mentioning IMO.

rchippie 06.18.2007 06:27 PM

Quote:

Originally Posted by BrianG
You are probably ok with not balancing everytime, but why not do it? It's not going to hurt anything and you can be sure that your pack will always be balanced. I balance while charging all the time. Any decrease in charge time by not using a balancer is negligible. Technically, since the bal does discharge at a low rate, charge time does increase, but is so small that it really is not worth mentioning IMO.


I agree with you & i feel safer using the balancer evertime.

jhautz 06.18.2007 06:34 PM

I dont balance every time. I have more chargers than balancers so I just balance every couple charges or so. I rarely find anything that take more than few minutes to charge with the exception of some of my older 10C packs that get pushed very hard and tend to go out of balance more. But even they arent that bad.

BrianG 06.18.2007 06:43 PM

Well, if you don't have enough balancers, that's another thing. I only have two chargers, so I have two balancers. My Hyperion charger acts funny though no matter what lipo battery I use. Once the voltage gets to ~4.1v/cell, the charger errors out ("output voltage too high"). The only way I can get it to not do that is to lower the charge current to about 3.6A. Weird. So, I use that for all my NiMH and the Xtrema for the lipos.


All times are GMT -4. The time now is 09:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.