![]() |
I took truck out and test drove it. It did great for little while. Can some one tell me how you tell if motor or esc is bad. I think it is the esc.
|
What does it do(or doesn't it do)?
|
I took truck out and test drove it. It did great for little while. Can some one tell me how you tell if motor or esc is bad. I think it is the esc.
|
Sorry about the repeat. It keeps going back like you unhook the batts. It is cogging really bad. I may hook the other motor back up and go from there.
|
Does it drive?
|
every now and then. You will get it to move some. The motor feels like it does not spin free as it did.
|
That could be a problem. Have a look at the motor. is the shaft still in its proper place? I recently had a motor that somehow had the shaft move towards the rear of the truck, which caused some drag. This is not a good thing if it is the case and could damage the controller if you run it.
|
That don't sound good. I in the process of putting another motor on. The one I had before i put that one on. The shaft isin right spot. It has a smell coming form it to. My opinion is changing on problem. I haven't ruled out esc. It may be bad as well.
|
The motor smells or the controller?
|
motor. The esc has an electric smell. the motor smells burnt.
|
It is pretty hard to burn up one of those motors. I hope you didn't bury the mounting screws into the windings when you installed the motor(that would cause some trouble).
|
I checked that when put it on. I had to add some washers to space back some. Had heatsink on motor to. Sh** it happens right. lol
|
Well, yes, Sh@# happens, but there is usually a reason for it to happen.
|
The motor seemed to get a little warm. Kind of hot really. I am running a heavy truck though. 18 pinion 70 on the spur. 18 cells gp3700. Truck weighed in at 14.5 pounds rtr. Weighed before i took it out. It did great for the size motor.
|
Wow! You were working the motor pretty hard! That is a lot of weight for the little Lehner, and tall gearing for the cell count as well. The 7xl with a lower gearing is more the motor for the beast you are running!
|
| All times are GMT -4. The time now is 04:56 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.