RC-Monster Forums - Center driveshaft questions

Page 2 of 2

Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- Revo (https://www.rc-monster.com/forum/forumdisplay.php?f=24)

- - Center driveshaft questions (https://www.rc-monster.com/forum/showthread.php?t=8484)

lincpimp

11.08.2007 02:17 AM

Quote:

Originally Posted by MetalMan (Post 127832)

I think Mailman put some fluid in the diffs, so he'd have to say what's in them.

You could also try a smaller spur, like the 40t.

Ok, I will ask him.

Not sure if the 40t spur will work, as the motor will most likely touch something before it gets close enough.

MetalMan

11.08.2007 02:19 AM

I was able to fit 20/36 gearing with a Feigao 540C 7XL without any rubbing.

lincpimp

11.08.2007 02:23 AM

Quote:

Originally Posted by MetalMan (Post 127834)

I was able to fit 20/36 gearing with a Feigao 540C 7XL without any rubbing.

Ok, I have a NIB 40t spur handy so I will give it a try tomorrow. Thanks for the info, a few teeth off the spur should help the top speed! Bet it was fast with the 20/36 gearing! That will save me the cost of another pinion gear!

All times are GMT -4. The time now is 02:00 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page