RC-Monster Forums - Big 12 pole outrunner setup in emaxx LOOK!

Page 2 of 2

Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)

- - Big 12 pole outrunner setup in emaxx LOOK! (https://www.rc-monster.com/forum/showthread.php?t=9305)

sikeston34m

01.02.2008 07:20 PM

Quote:

Originally Posted by ilpufxit (Post 137955)

I"ve been running this unit in my E-maxx since June. Not a lot of miles on it yet but so far so good. I'm running 4s lipo 6000mah, it flies. I like having the 2 speed trans, its driveable for track/jumping in 1st and speed runs in 2nd. No problems with the oil staying inside, only minor seepage. Not running dry is very important imo. I've ripped out 2 rear driveshafts, but no trans problems. Two thumbs up on this unit if you can still get one.

What kind of drive shafts are you running?

rootar

01.02.2008 08:35 PM

have you tried 5s on it sike?

sikeston34m

01.02.2008 09:09 PM

Quote:

Originally Posted by rootar (Post 138048)

have you tried 5s on it sike?

Yes I have. 5S is really fast. :yes:
It's just about all you're gonna want I think.

rootar

01.02.2008 11:51 PM

would it do good on dual 6 cell 3300 packs? if it would ill tell my frined bryan to take a look at it, he'll prolly get it in 2nd gear for 2 mintes maybe each run, all he wants to do it climb these gravel piles and do wheelie and some small jumps

sikeston34m

01.03.2008 01:15 AM

Yeah it would.

Ummm, that one just sold.

I'm going to have to order some more parts to make more. I'm out of stock on some things.

brushlessboy16

01.04.2008 08:55 AM

what motor is that?

does anyone know the specs?

i might try this setup on my Raze if it is affordable

sikeston34m

01.04.2008 10:07 AM

Quote:

Originally Posted by brushlessboy16 (Post 138405)

what motor is that?

does anyone know the specs?

i might try this setup on my Raze if it is affordable

Sure I know the specs. :intello:

It is a Tower Pro 650kv Outrunner. The stator is a 3520. It has a 5mm motor shaft that is custom made.

lincpimp

01.04.2008 11:18 AM

Quote:

Originally Posted by sikeston34m (Post 138412)

Sure I know the specs. :intello:

It is a Tower Pro 650kv Outrunner. The stator is a 3520. It has a 5mm motor shaft that is custom made.

How do you know the specs Sike? Did you buy one?

HAHAHAHAHAHAHA:intello:

All times are GMT -4. The time now is 11:56 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page