Yes that diff will work fine...I just used the hyper center diff because I wanted to match the UE spider diffs I am running in the front and rear.

8mmX16mm bearings are the size...

Let me know if you figure it out or if you find a supplier for Ofna part number 18987.

Thats okay, answers my questions. I was just somewhat scared by the $100+ price tag on some of those diffs....

I'll see if I can find anything on the monsterpirate center.

Thanks Neil...by the way...I found my hyper diff on ebay for $34!!!!!!!!!!!!!!!!!!new in box. There are still lots of them available. I also found a set of Spider diffs (front & rear) for $55 each. Wish I would have found them before I bought the UE spiders. Oh well, I am saving them for my next build.

have you seen this thread?

http://www.rc-monster.com/forum/showthread.php?t=10092

That is nice work Serum. You never cease to amaze me with the quality of your work. So how did the design work out for you? I almost went with a CF chassis on my G3R revo that I am building...but backed out and went with aluminum at the last minute...I was afraid the CF would not hold up as well.

Carbon is quite tough as it is;

I managed to break a CF lower tray on the gmaxx though; but that was with the 2.5mm thickness. This plate is 3.6mm thick, i hope for the best.

Usually if carbon breaks, aluminum is deformed beyond repair. i was still able to use it though, it was just a crack on one of the bridges.

:diablo:I have been waiting for this info........................ why didn't anybody tell me????????????????:diablo:

Sorry dude...I have been crazy busy and I forgot! PM me if you want specifics....it is a sweet setup...and it is going to be even better when Mike releases the slipper diff. If Mike asks, the drive shafts are 88mm and 130mm long (tip to tip). The pin to pin length is about four to five mm shorter.

All we need now is a direct drive unit for the gorilla chassis:whistle:.

haha when i was at work i was reading the new rc car mag that came in today and it had that in it.

no prob, atleast it all worked, how is it in the truck?

It is a very solid mount. I am very happy with the purchase.

very nice work, i can't wait to get this unit and show off my project.... that's a killer truck, love the flextek's:yes:

Here are some more close-ups. I bought two of these units from Mike and I am still waiting for the drive shafts for this one to be delivered. Anyway, I put an Ofna CRT center diff with Kyosho spur in this unit.

<a href="http://picasaweb.google.com/ssspconcepts/TitanMaxx/photo#5169520865667759730"><img src="http://lh4.google.com/ssspconcepts/R73T1okYvnI/AAAAAAAABVU/pExZN0zMtEA/s800/IMG_2071.JPG" /></a>

<a href="http://picasaweb.google.com/ssspconcepts/TitanMaxx/photo#5169520878552661634"><img src="http://lh3.google.com/ssspconcepts/R73T2YkYvoI/AAAAAAAABVc/AzDBJ5oSVjQ/s800/IMG_2072.JPG" /></a>

That really is a thing of beauty. Had a thought- it would be entirely possible I reckon to use the modified stubaxles as the output shafts on the center diff, then you could use 3.3spec driveshafts for the centershafts. Plastic I know, but it would be a nice temporary solution maybe...

has there been any mention on price for one of these kits yet or did i miss it. i know thats for mike to chime in on, but maybe he already gave a price on the production units.

I know what I paid...it was very reasonable considering the kit came with the mount and two drive shafts. Who knows, he may slightly increase or decrease the price...I will let Mike broadcast the price...its not for me to say.

i can't wait........................ sssp, we need videos!

I will see what I can do this weekend!

i didn't expect you to let the cat out of the bag so to speak. i know yours are somewhat of a trial first run sort of thing. i will most likely get some regardless of price within reason. i'll wait, i have enough projects to keep me and my income busy enough.

Good news...I heard today that the drive shafts are now being made...so for the folks waiting it shouldn't be long now.

Now your just being mean. showing us all this stuff and telling us to wait for it. :lol:

Yeah...I know...Mike has been busy and has a life too...which is prone to all the stuff that you and I could experience on any given day. But I promise you this...it is a nice setup that is worth the asking price.

I cant wait for the slipper diff to be released it will change the whole industry...I hope Mike got a patent...I'd like to see him rewarded for his work and responsiveness to our needs.

I dunno, if Mike makes too much money from this stuff he may decide to retire early.... then we'd all be thoroughly buggered!

Any updates on when this will be available?

Why Mike don't try to do the same thing to fit the stock revo chassis????
Not all guys hear can spend lot of money on a FLM or G3R chassis.
The majority of people who convert the revo kept the stock chassis.

So please Mike, COULD YOU MAKE A DIRECT DRIVE UNIT FOR THE STOCK REVO CHASSIS????????????

Thank you

I will take one, if not two of these if you make it Mike! And I am sure that others would buy them to. Also while you are at it, something like the tekno battery tray that would fit on the motor side of the chassis. That way we can run a dual pack 4 or 6s battery setup and keep the balance right.

Hey David, have you seen this:

http://www.rc-monster.com/forum/showthread.php?p=154964

Yes i've see this post, and it's about what i'am to do on mine. But if Mike do it, we don't have to spend time to build it:whistle:

Hey Mike, Any news about a direct drive unit for G3R chassis? :whip:
I need one :love:

Hello Mike,

I need one too...:yes::yes:
Wath is the news about a direct drive...?
Thank

Anyone know what happened to the direct drive units?

I'd buy two, at least.

I emailed mike about one for my build and he hasnt gotten back with me. He must be busy as usual.

It's Sunday... Give him time...

he emailed me back and said that the emaxx center diff mounts will take priority and he will manufacture these mounts as soon as his slipperential project is done...:yes:

can you give me the demensions of that bottom mounting plate? and the height of it all together. i want one without the shafts..can someone get me the price this would work for what i want to do

Add me to the list, I will buy two for sure! :surprised:

I want one!!