RC-Monster Forums - Tekin Redline brushless motor

Page 2 of 2

Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- Team Tekin (https://www.rc-monster.com/forum/forumdisplay.php?f=37)

- - Tekin Redline brushless motor (https://www.rc-monster.com/forum/showthread.php?t=10640)

Mister-T

09.02.2008 12:57 PM

Quote:

Originally Posted by DRIFT_BUGGY (Post 207736)

I was going to use one when I was going to do a conversion for a CRT.5. The Traxxas VXL motor is a popular motor used in the CRT.5 and it is a 3500KV. Tekin make a Redline in a 3700KV which should be perfect

Tekin motor are smaller, there are short can like castle motor

Mike.L

09.02.2008 03:54 PM

but a lower kv motor on the correct pinion to gear ratio then perhaps it shouldn't be a problem???

-note even though it is the same size as the mm cans..

Mister-T

09.02.2008 04:34 PM

Might run a little hot. And might appear a little tame if your planning to bash in the street. But if it's for local race track it will be ok

snellemin

09.02.2008 05:54 PM

I found the graph of the 448 Tekin motor on 4s A123.

60/14 gearing in a Rustler with 4" tires.

http://i189.photobucket.com/albums/z...n4484sa123.jpg

Kajman

09.03.2008 01:19 AM

Quote:

Originally Posted by Mister-T (Post 208081)

I'm running custom 8 ° on my mamba max. It give sligthly more punch

OOooo, nice, I hve to reprogramm my esc, I run 30° on my Genius 95 and its a little bit hot :)

Mister-T

09.03.2008 07:34 AM

You don't need that much timing on a mod motor.

Kajman

09.03.2008 08:45 AM

Yeah, I was too lasy to change after using GM Racing motors, which require that timing.

All times are GMT -4. The time now is 02:49 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page