Look at the 2.5 revo specs and see if the wheelbase is the same as the slayer...

I don't wanna! :tongue:

Bloody odd if you ask me - 5mm difference - why bother!

Slayer

Length 22.36 Inches (568mm)
Front Track 11.65 Inches (296mm)
Rear Track 11.65 Inches (296mm)
Weight (no fuel) 7.47lbs (3.39kg)
Height (overall) 8.43 Inches (214mm)
Wheelbase 12.7 Inches (323mm)
Front Shock Length GTR™ Aluminum 3.43" (87mm)
Rear Shock Length GTR™ Aluminum 3.43" (87mm)
Front Tires Slash 2.2" (Pre-Glued with Inserts)
Rear Tires Slash 2.2" (Pre-Glued with Inserts)
Wheel Diameter 2.2 Inches (56mm)
Suspension Fully independent Progressive 2 Rockers
Front Wheels 2.2" Satin-Finish
Rear Wheels 2.2" Satin-Finish
Gear Ratio (1st Gear) 15.75:1
Gear Ratio (2nd Gear) 10.05:1


Revo
REVO 3.3 REVO 2.5R
Engine TRX® 3.3
Racing Engine TRX® 2.5R
Racing Engine
Starter EZ-Start® EZ-Start®
Chassis Type Extended Chassis
3mm 6061-T6 Aluminum Standard Chassis
3mm 6061-T6
Aluminum
Length 20.650"
525mm 19.469"
495mm
Front Track 16.378"
416mm 16.378"
416mm
Rear Track 16.476"
418.5mm 16.476"
418.5mm
Center Ground Clearance 4"
101mm 4"
101mm
Height (overall) 10.375"
264mm 10.375"
264mm
Wheelbase 13.7"
348mm 12.5"
318mm
Shock Length GTR™ Aluminum
3.43" (87mm) GTR™ Aluminum
3.43" (87mm)
Weight (RTR no fuel) 9.8lbs (4.448kg) 9.4lbs (4.26kg)

original revo wheelbase was 12.5" and th Slayer is 12.7". Thats close enough for me to think its just the 2.5 revo chassis painted a different color. I actually hope it is. It will have ready made conversion kits for it then.

The slayer has exploded views up now. Looking at the exploded view next to the original revo exploded view it looks like the identical chassis to me. I'm just about positive the revo conversions will bolt right on.

Damn it.... It looks like I just might have to get me one of these now. It just looks like a fun truck. I just hope that someone comes up with a way to make some sort of mud guard for the wheels on this thing. The body covering the wheels looks like it will make a big mess inside this thing. Normally the body helps keep the junk out of the chassis, this body setup looks like it will collect the dirt onto the chassis.

Maybe some sort of simple aftermarket under shell that will cover the chassis more tightly would be a good idea.

It would be easy enough to make a g4slayer....

Amain now have it listed on their site for $469.99 and due August 4th
http://www.amainhobbies.com/product_...ducts_id/26135

http://images.amainhobbies.com/image.../tra5908_2.jpg

And Tower also has it for $469.99 and due early Aug
http://www3.towerhobbies.com/cgi-bin...=LXVHU9**&P=ML