RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   strange neu deal (https://www.rc-monster.com/forum/showthread.php?t=14111)

bl-is-future 08.08.2008 01:04 PM

sorry tex you are a little behind... he has contacted neu already and all is well :lol:


Quote:

Originally Posted by TexasSP (Post 199639)
Give the guy a chance. He is obviously not dishonest as he came on here honestly seeking advice. I am sure he will make an effort with neu and all will be well.


aqwut 08.08.2008 01:16 PM

Quote:

Originally Posted by bl-is-future (Post 199572)
i dont think cost is really the point. It is a point of honesty. If you are dishonest it WILL come back to bite you in the ass sooner or later. I have seen it happen to many before.

Damn right.. it always comes back and bite you in the ass...

but I bet you Neu will just let you have it without any extra charges... Hopefully this is the case...

Byte 08.08.2008 01:44 PM

Quote:

Originally Posted by rootar (Post 199622)
i knew exactly what had happened, i had called about 3 weeks ago asking if they had any testers or rebuilt ones forsale, but they didnt have any at the time so i shelled out and bought mine from mike, but mine is the new updated version, with bigger bearings, flatspot on shaft, and thicker screwed on endbell, (basically a teckno version but black with holes in the ends.)

im using mine in an Xray 8xb on a 5s 5000 flightpower pack

if i was you id keep it these are awesome 5s and 6s motor from what i understand, but on 4s they arent quite as "explosive"

What do you mean with this? Do they sell motors that were not 100% perfect? And you can get them cheaper than normally?

Sorry my Englisch sucks like hell :lol:

ah-see 08.08.2008 02:00 PM

Quote:

Originally Posted by Byte (Post 199656)
What do you mean with this? Do they sell motors that were not 100% perfect? And you can get them cheaper than normally?

Sorry my Englisch sucks like hell :lol:

Here take a look at this page:
http://www.neumotors.com/20061222/Special_Deals%21.html

Byte 08.08.2008 02:04 PM

Quote:

Originally Posted by ah-see (Post 199663)

Whoot! Thats awesome! Ty! :party:

Just 1 question, they don't update that page often, right? Or why do you guys call them?

Sylvester 08.08.2008 02:16 PM

I too ordered a neu 1512 2.5d/f through mike and got a 1515, im not complaining :D

rootar 08.08.2008 04:32 PM

i dunno if those batteries would really suffice for the high amp draw your gonna get out of that revo, Mike (rc-monster owner) told me has has seen peaks of 200amp burst from his 1515 2.5d in his truggy on 5s, with those packs only having a 20c (100amp) burst rating id be a little concerned, i beleive some had found that a 4350mah 3s 25c/50c flightpower fit in there just peferfect also you might look into two of those as they would definetly would give you the amps you need and the same runtime of the truerc packs (they will hold up there voltage better under load so they will prolly have the same runtime as the truerc 5000s even though they are a lower capacity)

thats just my take on it someone else might have experenice running something of a similar setup and could give you a more accurate opinion, but i think im pretty close.

tc3_racer_001 08.08.2008 05:32 PM

damn... i just paid 3x that price for my 1512 2ds! a well, at least i know where to get a replacement :P

TexasSP 08.08.2008 06:25 PM

Quote:

Originally Posted by bl-is-future (Post 199641)
sorry tex you are a little behind... he has contacted neu already and all is well :lol:

My computer had a brain fart and didn't process my click until later or something.

bl-is-future 08.09.2008 10:00 AM

Quote:

Originally Posted by TexasSP (Post 199730)
My computer had a brain fart and didn't process my click until later or something.

:lol: i know what you mean my isp does some pretty funcky stuff sometimes

coolrunnings 08.09.2008 10:59 AM

I know where to get brand new 1515 finned motors for 220.00 (anytime) as far as this used 1515 smooth can goes...yes 100.00 is a good deal but not fantastic. He got a 150.00 dollar motor for 100.00 bucks.

George16 08.09.2008 12:23 PM

Quote:

Originally Posted by coolrunnings (Post 199900)
I know where to get brand new 1515 finned motors for 220.00 (anytime) as far as this used 1515 smooth can goes...yes 100.00 is a good deal but not fantastic. He got a 150.00 dollar motor for 100.00 bucks.

You're probably talking about Fred.

http://www.uniquefe.com/

coolrunnings 08.09.2008 12:45 PM

No, look around make some calls (phone calls) and make some offers!

big greg 08.09.2008 08:41 PM

i really dont think you can get a good used 1515 for 150 anywhere, thats a steal, about 200 maybe, shoot i paid 150 for a 1512 and was happy as hell

coolrunnings 08.10.2008 03:20 AM

A smooth 1515 may in fact be worth more than 150.00 in certin circumstances...but I'll never pay it. You might have a point though because I watch alot of auctions on ebay and am amazed at what people will pay for a used item just to save a few bucks not having any idea as to what the item has been through...to me buying used electronics is a real crapshoot. 200.00 for a used 1515? Not me no way.

George16 08.10.2008 07:04 AM

Quote:

Originally Posted by coolrunnings (Post 199922)
No, look around make some calls (phone calls) and make some offers!

If I'm in the U.S., phone calls are not a problem. However, it very expensive for me to make international phone calls from Japan :intello:.

tc3_racer_001 08.10.2008 07:59 AM

^+1!


All times are GMT -4. The time now is 08:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.