good question... im not sure yet seeing that i dont have a transmitter! Ive been using a fairley strong magnet(can hold paperclips through my cheek and earlobe) and it must be about a half inch away! by the way my body is almost done! 2 more coats of white and then its complete!

Yay new body!
 

Ok so I finally got my body finished! here are the layers from outside to in.
1. Vinyl cut by my school's vinyl cutter
2. 3 layers of spaz stix gold to green chameleon paint
4. 3 layers of flourescent green
5. 3 layers of flourescent yellow
6. 3 layers of opaque white

dont look too bad for my first body job...


http://i263.photobucket.com/albums/i...9988619100.jpg

http://i263.photobucket.com/albums/i...9988619807.jpg

dont look half bad mike!
I would cut a small hole in the windshield for a little airflow inside the body

Looks good.

Very nice. The body looks very good!!

and to make it even nicer, LEDs! I have a white one out the front, a red one out the back, and 4 green ones inside the body! sorry for the bad pic quality, but gif's suck as a picture format... The LED's are glued in nice and the wires are all tucked out of the way, but the power system ads a bit of extra weight... I have glued in my hyper a 9v battery and 2.4v NiCd to power the lights

http://i263.photobucket.com/albums/i.../hyper7LED.gif

Very nice

Hehe, that'd be MY LIGHT KIT :)

Nice Hyper 7 ;)

I heard one of your cells on your pack took a dump. What pack do you plan on saving for?

well, I'm about to contact linc to have him pull out the cell, then i will have a 4s pack, and then i will put the other cell, which still works on my nintendo DS! ontop of that, My birthday is the 8th, and I got 2 of the RC-M 2s lipos in the mail now. ive seen them run in ben's god ruggy and they are amazing!

Hmm, I dont see it being able to fit in the case of the ds w/o some good ole duct tape.:intello:

Wait wait wait, if.. a pack takes a dump, does it make another lipo? A smelly one perhaps? What if you put two packs together, do you get a mini cell?

Something you'd expect out of linc, I know.:whistle:

Looks like I beat you linc. :tongue:

Haha...

well, the pack is still holding voltage, although it is vented and smelly. and of course nothing can be complete without some ducttape! i was going to probaby make a small lexan casing for it, and tape it to the bottom of the DS with leads soldered to the battery port of the DS, and deans so I can use my lipo charger... although, since im just replacing one lithium battery with another, and they are both 1 cell, 3.7v couldnt I charge via the DS/ac adapter? it might take a while, but hey, when you have 20+ hours of runtime...

In other news, today is my birthday! I got my RC-M 2s2p hardcase lipos today, with a nice harness made up! They are amazing! only thing I have to criticize is that unlike shown in the picture and description, only one end of my wires had bullets on only one end instead of both. I'm glad i got these because I almost killed the rest of my pro tek lipo! Little did I know that with a 13t pinion and 46t spur, in my car, it went from a top speed of 43 to 69 mph, pulling 126 amps constantly... And here I am running the 20c(80 amp cont.) in my car, with full throttle 95% of the time for the entire run... the lipo didnt cool down for 2 hours, but suprisingly, all the cells survived! Also, My fake badlands came here today! which is also good because running the hyper overgeared turned my Jamin shredders into slicks in a single run! Now all I have to wait for is my mmm combo(ordered 12/8/08) that is my xmas present, my proline revolver v3's, and my new lipo charger!

http://i263.photobucket.com/albums/i...1475631437.jpg
The bald shredders

http://i263.photobucket.com/albums/i...1475630962.jpg
the tread style

http://i263.photobucket.com/albums/i...1475631920.jpg
on my buggy

Damn those tires are skinny! Looks good though :)

Deep lugs, lots of traction!

Looks good.

Bitchin. Reminds me of my old mugen.

http://i160.photobucket.com/albums/t...X/IM006147.jpg

What ever happened to that thing?

Those knock-off badlands are, in a word, AWESOME. I've been beating the heck out of mine (with 6S) on concrete, asphalt, dirt, whatever and they wear great. You'll love 'em.

hah only took me about 10 seconds to figure that one out on my own :lol:

MY MMM 2650KV COMBO CAME TODAY!!!!!!!!!!!!!!!!:yipi::yipi::yipi::yipi::yipi::yipi::yipi::yipi::y ipi::yipi::yipi:
WILL POST PICS AND VIDS ASAP!

You Lie.:whistle::intello:

no, its here in spirit..... i wrote that on the way to the post office. The mailman came. left a note. said I had to go to the post office on the 13th to pick up my package from castle creations. I go there, show the guy the paper. he said that the man must've wrote the wrong date. they have it, the man said, but he cant release it for 24 hours...

yay my mom picked it up from the post office! only 5 1/2 hrs til i can finally touch it!!!! just gotta wait til i get home from school!

Let us know.

http://i152.photobucket.com/albums/s...114091804a.jpg
http://i152.photobucket.com/albums/s...0114091805.jpg
http://i152.photobucket.com/albums/s...114091805a.jpg
http://i152.photobucket.com/albums/s...0114091806.jpg


The MMM 2650 :)

Very nice.

I'm so jealous.. I need one for my E-Savage.
Is that going in the Hyper-7?

it IS very nice! only thing is that it came with a 32 pitch pinion and i run a mod 1 setup :( i like the green pinion...

and yes it is going in the h7

You wanna donate me a MMM? :]

You can always dye it? Or anodize it?

What, by connecting 10S to it you mean? :party:

Umm, I meant dye? Or did I ? -.^

And that too.

2 10S in Series will always work.

Thats messed up


Now something to keep up with my 2200 traxxas version :)

http://i152.photobucket.com/albums/s...0/PICT0134.jpg

hehe, just ragging on you man :wink:

heh, i can see where u get your name from... NO

:lol:

Do you post this everywere...:lol:

yes he does... ive seen it in like 50 different threads lol

Meh. at least its relevant

i dont kno where it wouldnt be on a forum about r/c