If you're interested, I'm about to part out my e-maxxes. Among the list of goodies:

-UE CVDs
-UE Diffs
-Ultramaxx Tranny (complete)
-BKWarrior 9918
-Fiegao 10L

There's tons more, including complete trucks and high powered servos.

Actually, I think I'll just make a new thread.

That ebay emaxx is almost simular to mine for more than half the price. I've lost 3,5k in euro's on my machine, including brushless system and all electronical stuff.(not the mention the custom chassis proto's).

So in other word's, you'd be better buying that than buying single part's. Saveing yourself some money you can instantly drop a bl system in there.

That what I was thinking about, but I think I'll find a better substitution with Mike's help.

thats me that bids the 1k dollars he he he I cant go anymore.

Now its worth 16?? dollars which makes it even more costy.

Hell yeah it does. Like I said, I lost around 2500 euro's to get mine into an all alum state, excluding electronic's. So yes, it is worth it. In my eye's it is anyhow.

well worth it I bet he has it set for 1500 reserve and thats still a deal.

So, shall I go for it?

Do it allready! Before someone else take's your ride!

do it do it do it do it do it do it......

I've always been weary of Ebay sellers, at least you can feel like your not going to be ****ed around. I am sure you'd like to steel it. However there are somethings that you have to BUY. Normally I'd say wait and see let the seller feel some pain. I think,in this case, the seller knows what he has and what its fair market value is. He is already taking a beating from the retail price and I sincerely doubt the price will get any better.

Now is your chance. Pull the trigger.

One of my friends offered me his super hopped up t-maxx ( which costed him over 7k including a .27 engine from Novarossi that is worth over 1100 dollars) for only 900 dollars, but the problem is that he damaged the screws used to hold in the steering knuckles of the front and rear arms. Either than that its okay as far as I've heared and he says that he has a special Maxx body made exclusively for him for around 299 dollars?!!! I have to check it out first and then ( if I like it) I'll take it and convert it to brushless using either G-maxx or FLM extended chassis. I hope its still in good shape, though. Everything is either Aluminum or Titanium except for the receiver or servo covers.

I can't even fathom how $7K was put into one truck. I've spent thousands myself, but $7K?!

Is everything gold plated or ecrusted with diamonds? I'd love to see a truck that cost that much. (Actually, I'd love to have enough money to justify that much spent on one truck.) ;)

If these screws are torn, that tells something about the owner too..

7K? he did include the 1000 gallon of fuell too?

Who knows, but I'm sure that when I got to my local club I saw my friends were gathering around something and when I got to it, it was that silver shiny t-maxx which I'd never seen anything like it befor. I asked them what is it all about and they told me that this t-maxx is worth $7k or more. I could not believe it, but I do remember that some of you said that an e-maxx would cost over 5k to fully hop it up.

this guy selling this emaxx is actually a good guy i dealt with him before and he has a major shop in jersey and online shop also. He is only selling this (dont quote) because of a business hardship with the supermaxx owner no he wont carry his products and same with stormerhobbies.com wont carry supermaxx products either they have lots of left overs though of parts.

Yes hobbyshopnj

good guys, I also bought things from them!

I think I made a mistake about the t-maxx being priced for over 7000 dollars. Its actually 5989 dollars or around it, but still, its really pricy and the current price ($900) is incredibly good for a high priced machine.

Yeah but is it ue or something else? Like fastlane, integy, gpm etc. Cost doesn't say anything about quality.

If your going to buy an all alum truck, make sure it's ue. That's the best stuff you can get for the money.

Can you post a picture of that truck?

quality is only as good as its customer service I say! I can tell you I have the best products, but once you buy from me I dont care ha ha ha....

Reminds me of a story about schulze..... (quality/service story.. )

Nothing wrong with UE though, a very serious producer of topnotch stuff..

I heared names of companies that I've never known before, like feroni-veroni( something like that) and ceramic bearings from acer racing ( I know that one very well and I hate the way they served me) as well as Ti screw kit from another company and blah,blah,blah....the bad thing is, however, the truck weighs around 13KG (that's what some of my friends said, though I cant believe it) its almost equal to 90+ lb?????!!!!! Well as some says " seeing is believing" only when I get a hold of it I can tell you more. Wish me luck.

13kg is about 28 lbs..

Well, do you find it heavy for a brushless to handle it? Sorry for the miscalculations, BTW.

13kg, that is allmost imposible, unless it's a 1/4th scale. (my heavy aluminium savage weights about 15 lbs with 16 cells rtr.

it can be pushed around with brushless though, it just takes a little bigger motor. :p

Ti screw kit. There you have it. That's asking for stripped screw's.

13 kilo?! That's a instant no-no. I'll love to see some pictures cause I find it hard to believe. Even if you throw a 30 serie's bl motor in it, it will not be pretty to drive. Let alone how many part's your going to wear out. No i'm pretty sure you'll be better off with that supermaxx.

I'll go to him and I'll check it out anyway. I've spoken to Mike about my project and we're progressing just fine.

its worth $1000 but thats it! if it had VBS or if it was brushless then it'd be worth more. Even breaking it up and selling it off you'd have trouble getting more than 1000 - 1200

chassis: 250
bulkheads: 80
diff cases: 60
skids: 80
wheels: 100
cvds: 90
tranny: 60-100
motor/esc: 90
body: 70
im probably missing a lot, but thats the bulk of it and good guess may I say.

Either way I cant get it meanwhile, since it is only going to be shipped to canada and I do have enough money for it, but not for alot of other things IT will need. About that highly priced T-Maxx: its a SuperMaxx, actually around 3-5 Kilos in weight and the guy is asking for 1100 dollars to sell it away, however, I would like to get the good stuff from Mike and from him I'll get it. I just found a good old e-maxx for only 109 dollars from Dubai and I thought about buying it and work on it with the help of the members of this forum.

sold for $1800 .. i reckon its it rich .. its only worth $1000

$1800 could of almost built a new one from UE

Well, bye bye UE maxx.

Wow! $1800!! Yeah, I agree -- I think for that much you could build your own very nice truck.

Will a $2000 give me a top rated aluminum e-maxx?

If you chooise the part's right, yes.