I'm not sure how you would go about wiring only 1 though.... Take a look at how it works - http://66.241.195.91/lithium/lithium.asp?path1=lithium - I'm going to be testing these and another unit this week.
Alex

Well I am thinking like metal man. If you wire it in like a ubec to the input sensing wires and then pulg the LVD in the plug for esc and receiver. If you run 8s and 3v that is 24v. If it falls below that it will pulse the motor to let you know.

i am also thinking like metal man and CHC i dont see why you would need to lvd's if they are both going to one connecter(in the end)

LOL - Now that I think about it, that might work... How do the two sets of Dean's work once they get under the wrapper on the Warriors? Is it like a 2 to 1 connector kind of a thing? If thats the case, you could put the sensing wires on the 1 part...

well I run mine in a y configuration. I run the red wire off the esc to the #1 dean +. Run the black wire off the esc to #2 dean. This would be wire to hook the wires up for the LVD. red to red black to black. The the wire in between for a jumper. You could do a few like this as long as the lvd is on the first red and last black.

Sounds like it would work to me! You would be running a total of 8 cells, so in theory the cutoff can handle it...
Alex