RC-Monster Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   CORR Trucks - Slash, SCRT10, etc. (https://www.rc-monster.com/forum/forumdisplay.php?f=46)
-   -   Jammin SCRT10 (https://www.rc-monster.com/forum/showthread.php?t=25839)

Shark413 10.27.2010 03:10 PM
Quote:
Originally Posted by RC-NUT (Post 385567)
Nice truck man!! I haven't been on the boards in quite a while but I picked up a Jammin in September so I had to chime in. I really like your ideas.

My beef with the stock chassis was all the extra "nitro" holes that were not used. There harmless but just annoying considering how much we spent for a roller. I need to look around and see where you bought that chassis.

Did you take the front end off of a CRT.5? I have never seen one in person.

I have been running the new Novak Ballistic 550 4.5 system with horrible luck. It's fast, smooth, and runs cool when it's not bursting into flames. I'm picking up my third system tonight after the first 2 blew up. The second one was literally in flames. I'm only running 2s and a low gear. It never reaches 100 deg. Weird?

Again nice truck!
Thanks, I have been running an older Novak 4.5 HV with a MMP since March with no problems at all and I have been very happy with it. I have been posting regular updates on this thread, check it out:

http://www.rcshortcourse.com/forum/s...ead.php?t=4672
Again nice truck![/

bajabruiser 12.29.2010 02:06 PM
Hi all. I'm new to this site. Awsome trucks.
I don't know anyone that's ran a ballistic 550 motor with a novak esc. That hasn't had problems. What speed control are you using. I was using a GTB with a ballistic 550 5.5 After 3 replacements I went to a CC Mamba Max pro and the truck runs like a champ.

RC-NUT 12.29.2010 10:59 PM
I ended up trading my Jammin for a brand new Muggy. It was an awesome truck for sure but I only wanted to bash and not race. I'll have more fun with the Muggy and a CC 1518 motor.

I did end up switching to a MMP ESC after the Novak found a new home. I had problems with the BEC output on it. My Hitec servo apparently didn't agree with the ESC unless I added an external BEC. I traded the ESC and will try my luck with a MMM now.

slimthelineman 01.18.2011 07:20 PM
How much lighter is the snr cf chassis over the stock aluminum one? My truck rtr is a touch over six lbs. Just wondering how much of your pound lost was the chassis and where all the wieght came off thnx.

Ryu James 02.12.2011 07:56 PM
my full Carbon SCRT10
 
carbon towers and chassis. CAD designed in Pro/E and CNC machined. 3mm, 1k fineweave carbon and delrin lipo tray.

http://i471.photobucket.com/albums/r...s/DSCN0240.jpg
http://i471.photobucket.com/albums/r...s/DSCN0241.jpg
http://i471.photobucket.com/albums/r...s/DSCN0235.jpg
http://i471.photobucket.com/albums/r...s/DSCN0237.jpg
http://i471.photobucket.com/albums/r...s/DSCN0238.jpg
http://i471.photobucket.com/albums/r...s/DSCN0242.jpg
http://i471.photobucket.com/albums/r...s/DSCN0243.jpg
http://i471.photobucket.com/albums/r...s/DSCN0244.jpg

slimthelineman 02.12.2011 08:12 PM
Nice looking as always ryu. Any chance you would be willing to make another set of those purdy towers?

Ryu James 02.12.2011 08:20 PM
Quote:
Originally Posted by slimthelineman (Post 397688)
Nice looking as always ryu. Any chance you would be willing to make another set of those purdy towers?
yep, in fact i am making a few sets this week. you interested? pm me.

DrKnow65 02.15.2011 03:16 AM
Hey! You snuck in mechanical brakes :-)

Any chance you could post up a parts list of what it took to make that happen?
I'm going HV, and want to use mech brakes for tuning and running an air ESC...

Ryu James 02.15.2011 04:23 AM
Quote:
Originally Posted by DrKnow65 (Post 397997)
Hey! You snuck in mechanical brakes :-)

Any chance you could post up a parts list of what it took to make that happen?
I'm going HV, and want to use mech brakes for tuning and running an air ESC...
i used center diff outdrives from the Jammin CRT .5 as well as the brake calipers. i made some carbon brake discs, but the CRT .5 discs would work also. i used Tekno servo mount, Jammin aluminum center diff mount, and made my own motor mount. works like a charm.

Ryu James 02.15.2011 04:24 AM
Quote:
Originally Posted by slimthelineman (Post 397688)
Nice looking as always ryu. Any chance you would be willing to make another set of those purdy towers?
Thank you, Slim!

DrKnow65 02.15.2011 10:12 AM
Quote:
Originally Posted by Ryu James (Post 397998)
i used center diff outdrives from the Jammin CRT .5 as well as the brake calipers. i made some carbon brake discs, but the CRT .5 discs would work also. i used Tekno servo mount, Jammin aluminum center diff mount, and made my own motor mount. works like a charm.
Thanks for the quick reply, I appreciate it :yes:

I thought about using some CF I've got here to make the disc's for the outdrives I have, but I might as well just get parts I know will work :intello:

Ryu James 02.17.2011 03:01 PM
Quote:
Originally Posted by DrKnow65 (Post 398020)
Thanks for the quick reply, I appreciate it :yes:

I thought about using some CF I've got here to make the disc's for the outdrives I have, but I might as well just get parts I know will work :intello:
thats a good idea and it works too. before i got the CRT.5 parts i just grond a flat spot on each side of the stock outdrives and then made a carbon disc from 3mm carbon. that works well and its actually alot lighter than the CRT.5 parts cuz they are very large and bulky outdrives. i will take some pics of mine up close and post them in the next day or two.

Ryu James 02.18.2011 04:52 AM
sorry to double post again but here is update: i have a few carbon towers available now for the SCRT10 and will make more by order. please pm me for more details. pics below.

http://i471.photobucket.com/albums/r...s/DSCN0287.jpg
http://i471.photobucket.com/albums/r...s/DSCN0288.jpg

here are towers mounted with D8 shocks up front and MBX6 shocks on rear.

http://i471.photobucket.com/albums/r...s/DSCN0296.jpg
http://i471.photobucket.com/albums/r...s/DSCN0301.jpg
http://i471.photobucket.com/albums/r...s/DSCN0303.jpg
http://i471.photobucket.com/albums/r...s/DSCN0306.jpg

DrKnow65 02.18.2011 10:37 AM
Wow, pretty :intello:

I found a CRT.5 diff with brakes on eBay for $18 shipped, may go that way...
And my ofna hyper 10sc already has flats on the CD outdrives :oh:

Ryu James 02.19.2011 12:41 AM
Quote:
Originally Posted by DrKnow65 (Post 398411)
Wow, pretty :intello:

I found a CRT.5 diff with brakes on eBay for $18 shipped, may go that way...
And my ofna hyper 10sc already has flats on the CD outdrives :oh:
yep, thats what i did. all kinds of good crt parts on ebay for way cheap.

Cain 03.13.2011 11:03 PM
towers look great. how thick are they?

Ryu James 03.14.2011 08:30 PM
Quote:
Originally Posted by Cain (Post 400895)
towers look great. how thick are they?
i have them in 3.2mm and also 4mm.

Cain 03.14.2011 10:04 PM
you do graphite parts for any other cars?

Ryu James 03.14.2011 10:20 PM
Quote:
Originally Posted by Cain (Post 401009)
you do graphite parts for any other cars?
yeah, a few. i have done stuff for ten-t and scrt10, and have done carbon chassis' for quite a few 1/8 buggies and truggies in the past. are you looking for something specific?

Cain 03.14.2011 10:21 PM
thinking about doing a lightweight d8

Ryu James 03.15.2011 03:37 AM
Quote:
Originally Posted by Cain (Post 401012)
thinking about doing a lightweight d8
right on. i have never done parts for D8 yet. the cool thing about the d8 is they have more lightweight upgrade parts than almost all the other buggies. i have looked at alot of their parts and they make things like lightweight brake cams, ball end balls, diff pins, and more.
wish i could help you out. good luck with the project.


All times are GMT -4. The time now is 11:31 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.