RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   General Discussion (https://www.rc-monster.com/forum/forumdisplay.php?f=20)
-   -   Lipo repair (https://www.rc-monster.com/forum/showthread.php?t=16241)

lincpimp 06.01.2009 10:34 PM

Quote:

Originally Posted by rawfuls (Post 292080)
I think Lincy poo went night nighty for a long time.. :sleep:

:rofl:

Everyone's a comedian... Wonder how long you sat thinking that one up rawbuns?

H-Bag, sent you a pm...

rawfuls 06.01.2009 10:35 PM

Quote:

Originally Posted by lincpimp (Post 292082)
Everyone's a comedian... Wonder how long you sat thinking that one up rawbuns?

H-Bag, sent you a pm...

Oooooh, a few weeks.
You know, the usual...
:rofl::yipi:

Wow, Linc must get realllllly tired of me :yes:

lincpimp 06.01.2009 10:38 PM

Quote:

Originally Posted by rawfuls (Post 292083)
Oooooh, a few weeks.
You know, the usual...
:rofl::yipi:

Wow, Linc must get realllllly tired of me :yes:

Nah, any humor is welcome here, even it it is a bit "unrefined" (bad).

Keep it up rawpits, you will get there!!!!

rawfuls 06.01.2009 10:42 PM

:lol:

My comebacks are prettybad..... :whip: :oops:

Silly green pimps and their AK's... :no:

lincpimp 06.01.2009 10:52 PM

Quote:

Originally Posted by rawfuls (Post 292087)
:lol:

My comebacks are prettybad..... :whip: :oops:

Silly green pimps and their AK's... :no:

I will bust a cap in you azz... rawfarts... Do mess wit da green, my frog homies will be knockin you door down...

_paralyzed_ 06.01.2009 10:53 PM

I dead shorted two packs. Moral of the story? Check other peoples work before allowing them to plug it in. Or take over if it's your stuff and plug it in yourself, then you can inspect it before anything happens.

Just to be clear my friend did this, noboody here. He does all my soldering for free. Can I be mad at him when shit happens?:neutral:

rawfuls 06.01.2009 10:54 PM

........:oh::lol:

I'll just green screen you!

I have no clue, don't ask, I know that didn't make any sense.. at all... :neutral:

snauty 06.10.2009 01:05 PM

hey linc you ever do anything with that battery i let you keep, the true rc one.

xrayrc 06.16.2009 02:15 PM

hey linc can you help me with A protek 4s starter box pack? seems like 1 cell has gone bad pm me your info so i can mail to you its not puffed at all

gimpygolden 06.17.2009 09:03 PM

Hey Linc, do you have any experience with A123's?
I have 5 2s2p packs I'd like reconfigured into 2 10s1p packs. I've got all the taps,bars,wire and shrink I'll send along with.They would be sidexside config.(i was gonna do em' but not confident in soldering aluminum)

Also I have a Zippy 5s with 1 cell I can't get to balance with the rest I keep getting
4.2 on 4 cells and 3.85 on the other. I think I'd like this and another just like it redone to 4s packs.

And last I have 2 ThunderPower 5s packs that take a good amount of Mah. but have no punch. If you could have a look at them see whats up,if they're pooched so be it.
thanks

auto2 06.17.2009 10:21 PM

i have a 5s 3700 pack that looks and feels and chargesnormal. But makes no power at all. acts like a dead 4s pack would with same gearing. soldered a new deans on it just to make sure but no difference.

lincpimp 06.18.2009 12:15 AM

Quote:

Originally Posted by auto2 (Post 296634)
i have a 5s 3700 pack that looks and feels and chargesnormal. But makes no power at all. acts like a dead 4s pack would with same gearing. soldered a new deans on it just to make sure but no difference.

Is it in balance? How old is it and what mfg,c rating, etc?

nitrostarter 06.18.2009 01:53 AM

Linc, I have (2) Rhino 5s 4900's, and (2) Rhino 3s 4900's. Interested in reconfiguring these to (4) 4s packs?

I'll be running the 2200 on 4s in both 8T and 8B and 4s seems to be prime in both.

auto2 06.18.2009 07:38 AM

Quote:

Originally Posted by lincpimp (Post 296678)
Is it in balance? How old is it and what mfg,c rating, etc?

always been in balance. always used hyperion duo charger. got the pack from mike .its a enerland. only thing is the cells are a little squished on the end where it hits the end of the battery tray.

my guess is 2 years old? its twin pack i got at same time is still perfect. i use them maybe 5 charges a week?

lincpimp 06.18.2009 10:33 AM

Quote:

Originally Posted by nitrostarter (Post 296709)
Linc, I have (2) Rhino 5s 4900's, and (2) Rhino 3s 4900's. Interested in reconfiguring these to (4) 4s packs?

No prob, mail them to me if you like.

I'll be running the 2200 on 4s in both 8T and 8B and 4s seems to be prime in both.

Quote:

Originally Posted by auto2 (Post 296744)
always been in balance. always used hyperion duo charger. got the pack from mike .its a enerland. only thing is the cells are a little squished on the end where it hits the end of the battery tray.

my guess is 2 years old? its twin pack i got at same time is still perfect. i use them maybe 5 charges a week?

Hmm, the squished end may be causing the issue. If you have had that much use out of the lipo you are doing pretty good. 5 charges a week for 2 years is around 500 cycles...


All times are GMT -4. The time now is 07:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.