E-Revo
MMM v1 on 1.17 firmware
Neu 1515 1.5D for two months
Neu 1515 1Y for the last week
2xMA 8000mah LiPos

Straight out-of-the-box MMM, no mods.
Using single steering servo (HiTec 5955TG).
Spektrum DX3R

Both motors work great. Have geared for anywhere between 38-52mph according to Brian's script.

Have used custom LVC settings between 12-13v.

Have used 'normal' and 'lowest' timings.

Have used anywhere from 10-50% punch control.
(always lowest start power)


Hope this helps.

The MMMv1 I sold to my friend is still running strong. It's stock, but has the 1.19 firmware. He's running it on 5s lipo with a Medusa 60-1600kV motor.

He chipped a fan blade the other night, but I had an extra MMM fan, so he'll just swap them out.

My still is fine. The only "mod" is that I accidently severed the switch wire between my spur and pinion. So I am running an E-Maxx on 4s with a 1515 1y.