you should get a real neu or an hpi neu so it's black:yes:

I was thinking about giving Castle a call to see if I could get one in black. I plan on running over 50K and I hear that Neu's don't like those kinda rpms. I figure if they made the 2200 to run off 6s, that is what I am going to do. But I do have the Tekno Motor mount and i will be putting a fan on the motor so the green might not show that much.

neus will handle 50k, it's all about gearing and checking temps. You could always paint it black, speedassault did an awesome paintjob on his neu in the project x forum

Get the HPI motor

You can get a Traxxas CastleNeu they are black...

I looked for a Traxxax Castle motor but no one carries them by themselves. I am looking at the HPI 2200 now. I spoke with a Castle rep and he assured me it is their motor, not a knock off.

Check ebay for the trx motor

I am liking the HPI number. It is available and it looks pretty sweet.

The CF frame
 

I finally recieved my CF sheet from Composite envisions and it is absolutly beautiful. Here are a few shots of the template and the cut out chassis.

SWEEEEEEEEEEEEEEEEEEEEEEEEEET! let me know how this works for if u like it I may do the same to my on road

The finished CF GTP II
 

Here is the finished GTP II. Motor, ESC and battery are soon to come.

Nice work BH. :great:
How thick is your CF chassis?

The chassis is 4.4mm thick. I re-cut the top plates as well as the servo plate. I almost don't want to run it, but there are nitros that are dying to be beat.

Beautiful workmanship

Thank you sir.