RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   CORR Trucks - Slash, SCRT10, etc. (https://www.rc-monster.com/forum/forumdisplay.php?f=46)
-   -   Slash 4x4 Ballistis (https://www.rc-monster.com/forum/showthread.php?t=26150)

slimthelineman 03.14.2010 02:33 PM

thats nice.... like i said it was drop in for us. no 5mm pinions needed! and yes the 3.17mm shafts do break... in 8th scale setups because the cars wiegh 7.5+ lbs. i have used your hv motors before and was simply stating i preffer the trinity. i run against other guys using the hv on 2s with a havok pro and its fast... but not fast enough. they also run hotter on 2s than we do on 3s, not alot(~20-40degrees) but still. as far as debris inside the motor.... never been an issue, the holes are probably there as well as the fan because the motor is designed for an e-maxx which weighs twice what the slash 4x4 does. not trying to rain on anyones parade, simply saying this setup is working better than any other i have seen so far shy of a full blown 8th scale system. even then its only slightly faster.

NovakTwo 03.14.2010 03:06 PM

In addition to breaking, we saw the old HV 3mm shafts just twist out of shape.

We are planning a Kinetic/Ballistic 4.5 SC system (2S) for the 4x4s--of course, it will be priced a lot higher than the current Havoc Pro/HV 4.5 system.

slimthelineman 03.14.2010 03:13 PM

ballistic 550 i hope but seriously if its more than around 250 theres no point

MTguy 03.16.2010 02:54 PM

Got my MMP and the ballistic 5.5T yesterday so sent the motor back today. Also got my connecters on along with the three for the HV5.5T so as soon as it gets here I'm ready..:yipi:

http://i418.photobucket.com/albums/p.../SCX10/MMP.jpg

MTguy 03.20.2010 09:42 AM

Received my HV5.5T and wanted to say thanks for the help on making the right choice. The MMP with the HV is the smoothest best system I've ever ran and love the no heat issues after a pack.
Thanks again..

asheck 03.20.2010 09:47 AM

Well I knew it would work out for you :D Those little ( compared to a 15 series Neu) sensored motors do run smooth as silk. I was amazed that even the 4.5 will crawl on 3s, better then any sensorless setup I have.

nitrostarter 03.20.2010 09:54 AM

Quote:

Originally Posted by MTguy (Post 356283)
Received my HV5.5T and wanted to say thanks for the help on making the right choice. The MMP with the HV is the smoothest best system I've ever ran and love the no heat issues after a pack.
Thanks again..

Glad to see it work out for you! Our suggestions go a long way. :lol:


Quote:

Originally Posted by asheck (Post 356285)
Well I knew it would work out for you :D Those little ( compared to a 15 series Neu) sensored motors do run smooth as silk. I was amazed that even the 4.5 will crawl on 3s, better then any sensorless setup I have.

I have a Tekin 17.5 system in my SC10. It was strong and very SMOOTH! I loved being able to gradually increase the throttle and see it slowly drive away instead of jerk and heat up.

MTguy 03.20.2010 10:44 AM

To be honest, it shocked the crap out of me on how smooth it is. Crazy to see those slow starts..lol It's always good to ask around before jumping into stuff and am so glad I did.
I just ordered 3 lipos today so that will give me more play time when they come in..


All times are GMT -4. The time now is 06:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.