Nice mount, i've been putting off fitting my warrior to my emaxx till I can find a way to mount it nicely. I took your idea and modified it a bit - i'm now using an rc10 battery cup secured to the spare motor hole. Gives it lots of extra protection in roll overs and harsh impacts as well.

Btw I fit a new plug to my one of them UBEC's on ebay, works very nicely now, you wouldn't believe how light these things are.

man...with all this talk about the UBEC's....makes me want to ditch my AA 1100 mah rec pack I made.....it doesn't weigh alot.......the only prob I have is the same batt that I use for the servo (ie the AA pack) i use to power my small fan above my Bl controller......and if I went to a UBEC...I'll have to wire that in some how to....I've tried wiring directly to my batts...and the fan doesn't last to long on 14.4 V...trust me......If I picked up a UBEC...I thought about wiring it inbetween the UBEC and the Rx........at the moment I have other pending items to pick up.....OH wellll...sorry to hijack your thread Neweuser...

If you not running a thrid channel could pug it there. If not could use a y connector for it to.

You could wire the fan to the UBEC output very easily.

I reckon it would be well worth you doing, AA's are a bit limiting on how much power they can put out in bursts, a 6v UBEC would probably make the steering slightly more responsive, and drop quite a bit of weight.

no prob with the hijack....happens all the time! If you need help you need help. and sometimes throwing a line in instead of a whole new thread is easier.