At least. :)

Just a quick vid of a jump i like to do alot, so you dont think i just pussy around on flat ground ;)
This is around 13m, but i`ve done longer ones there.. Problem is i hit flat landing if i go much further..

This is a jump i do almost every day, MANY times a day.. Not broken down once ;) 3 packs here, just today..

http://www.youtube.com/watch?v=R6n77IGI_hw

And a not so good jump ;) But i saved it, and the throttle was used hard :lol:
http://www.youtube.com/watch?v=azAnG88UDWU


BTW for gearing, now i had 69km/h gearing calculated with 3.7V, 0 ballooning, and measured 76km/h on a GPS..
At 3.9v 0.1 ballooning, this would be spot on :) (and fairly correct with taped truggy tires i guess)

Good info there...

Hey tell me thzero, the anti squat you changed to "4", what bushing did you use? I reckon you ment 4 degrees, and if i read the manual correct, the 1 dot bushing is 3dg, so does that mean you used a 2 dot upwards?

Yeah thats what I did.

AHh, a fellow norwegian, nice truggy you have there. All the good stuff is on it, V4, MMM, 1520...and more.

Thomas G

Hi, thanks :) Good to see there are more of us here ;)

The truggy even got better now, as i just put in a order for 4 new 5s 5000mah 45-90C Nanotechs..

The nanos was out of stock when i built the truggy, so i went for 30c`s..
The 30c`s has worked out great, but i like nanos better as they can handle harder charging and deliver more amps, to be absolutely sure it`s enough.. :party:

I just manged to burn my new 6s 40C 4000mah for my truggy, and the MMPro, because of a stupid mistake on my part.

I think I am going to buy a turnigy trackstar 150a esc, with programming card. And a turnigy 5s 40C 5000mah. From hobbycity thats cheap for the performance you get IMO.


TG

So true.. If you are interested in cheap 30c`s, i`m selling my 5000mah 5s :)

http://www.youtube.com/watch?v=w-rwL...eature=related

I need to get a friend with a camera, so i can actually control the car haha..
I did the same jump several times afterwards though, with great landings ;)