True. GTB was my first. I didn't mind the sensors, but didn't like the 6 cell limit.

Well I am not sure what I have owned lately.
I had a ofna mbx buggy converted.
emaxx stock and modded forms
Done ran 2250 10t 7xl 9xl 12xl xl1200 xl 2000 14L 1950 8t 1930 10t neu 1512 2.5d 380xl 8t
have tried 12cells 14 cells 18 cells 16 cells 4s lipo 6s lipo 26 cells
for escs 24160 mgm 18.97 schulze bk 9920 bk 7018 bk 36120 mgm 12012
There is more I am missing. I think I could use some more experence though.

I almost forgot the all mighty novak hv maxx. I have had two on a
gmaxx at one time with 24 cells. It was not impressive.

Leroy, you still have got the 1950/8, right? i got one too nowadays, do you like it?

I think you missed the Quark 80....

What were your favorite combos?

Here is mine from the very first to the present one Im running now

Modeltech system with a hacker motor
Jeti Phasor system with 30-3 motor
1895 micro Bk controller with 1920/8 motor
2095 Micro Bk controller ( still not sure on motor) more likely the 1930/10t I sent in for leroy

I think my favorite would be the 1950 8t for motor.
I am not sure on esc. The quark is great except for the 6s problem.
The mgm is great except for the programming part.
I loved the power of the 2250 though. Just wish truck did as much as me.

Maxcim N32 BL System. I have not used a system with more balance of power and efficiency from a 4 pole sensored motor on a short track.
I am still waiting to get a neu 1515 2.5d though :017:

Yes I do rene. It is on the mgt with center diff. I running the schulze on it.

Yeah, the 2250... Nice and powerfull!! i am still considering testing a 2230.. would be a better ballanced setup for a truck i think..

It's as leroy says, the quark with it's 6S problem.. MGM's programming 'problem' I guess waiting is for the Mamba monster maxx..

Ahemm...sorry for being so late.

Here's my humble setups over the years from old to new:

- Kontronik 480-42/ castle creations phoenix controller in a B4

- Kontronik 500-27/ Warrior 9918 in a T4

- Lehner 1920/8 / 9918 in a T4/B4

- Lehner 1930/5 / 9918 in a T4

- Kontronik Twist-55/ Schulze U-Force75 in a Tamiya TB-Evolution IV touring

- And finally, Lehner 1950/10 / 149.18/ 6s EVO20 in a SuperFLMaxx

In the future I might try a 3040/6 motor with 12s.....maybe?!?!

I'm 24, BTW and I think I should start finding myself a lovely wife...:)

A supermaxx brushless emaxx: Hacker master car controller hacker 8s motor (sold)
HPI savage: BK Warrior 9918 controller, nemesis 8xl motor (still have)
HPI Hellfire: BK Warrior 9918 controller, nemesis 10l motor (still have)
soon to have a 1/8 buggy with probably a 9918 and a 10l motor

RC18T- Mamba set up/ 2 and 3S LiPo
Xray 18- Hacker Micro set up/2 and 3S LiPo
4 TC3- Hacker C40, 6,7,8/ Hacker Comp/sport
TC4- Lehner Basic 5300/Hacker Comp (new smaller style)
HPI Rally- Lehner 4200/ Hacker Sport/2S LiPo
Supermaxx 8L/MM/4S LiPo
Bombproof Max C50/Hacker Comp/4S LiPo
Kyosho K2- Plete Max/MM/4S LiPo
Tamiya TGX- Hacker C40 12L/BK/4S LiPo
1/5 FG based Rally- dual 7XL/dual Hacker Comps/8S LiPo


Oh yeah...42 and counting...

got pics of the 1/5FG?... you must like Hacker...

I bought the Hackers when they were the more popular controller to have. Then got busy with work for about year and half, and am now just getting more time to play again.

http://www.rctek.com/phpBB/album_per...p?user_id=1142

The body, and chassis are an FG. I used an e-maxx front/rear/center tranny with RC Alloy custom shafts.