RC-Monster Forums - Neu batteries!?

Page 3 of 4

Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)

- - Neu batteries!? (https://www.rc-monster.com/forum/showthread.php?t=8422)

aqwut

11.14.2007 08:45 PM

I though hyperion or allerc had the universal balancer taps... they have all different kinds on one circuit board

rschoi_75

11.14.2007 10:44 PM

Quote:

Originally Posted by dadgummit (Post 129398)

WHAT THE.........
I just received 2 of the hard-cased 5000 mah neuenergy batteries and they are labeled as 20C cont and 40c burst.... Is that the same as the ones you received?

:lol:

One says 20/40C and the other three have 25/50C.... I guess it was a mistake.

Aqwut,
I checked out those adapter boards. I've got the TP and Align ones on the way (ordered similar ones from Maxamps two days ago), and already have the Hyp/polyQ adapters in hand. I'll know what works for sure by this weekend... I hope...:neutral:

aqwut

11.14.2007 11:12 PM

Sweet! I have a few coming myself... got mine from allerc though...
Neus graph looks pretty good to me.. how many of you guys have tried this battery?..
RC_choi... those neu batteries looks very square, do they have somekind of plastic protective coating..?

rschoi_75

11.15.2007 12:02 AM

yeah, these are the new 2s 5000mah car packs. They come with a hard plastic case. They are perfect for me since I have 5 different r/c's that can accept this battery. My E-revo, crt.5, my TC's and 1/10th buggies.

I'm tempted to get a few more... you really can't beat this deal. Mike definitely should start carrying these in the store.

gixxer

11.24.2007 08:35 PM

just received my packs today, but I also dont know what balancing plug to use. it doesn't fit my adaptor for my hyperion charger. should I order the adapter for thunder power batteries? would this one work http://www.maxamps.com/HYP-MULTI-TP.htm

bdebde

11.25.2007 12:21 AM

Quote:

Originally Posted by gixxer (Post 131348)

I just got my packs yesterday. The hyperion connector does not seem to be a match. Luckily, I ordered the TP adapter (to fit my Flightpower balancer) from Neu with the batteries.

gixxer

11.25.2007 12:45 AM

Quote:

Originally Posted by bdebde (Post 131391)

I just got my packs yesterday. The hyperion connector does not seem to be a match. Luckily, I ordered the TP adapter (to fit my Flightpower balancer) from Neu with the batteries.

so the tp adapter works? just want to make sure before making another order. thanks

bdebde

11.25.2007 09:58 PM

Quote:

Originally Posted by gixxer (Post 131396)

so the tp adapter works? just want to make sure before making another order. thanks

Part number neu-tp works for me, I can balance my Neu packs on my Flightpower balancer.

mmdooley

11.25.2007 10:59 PM

Quote:

Originally Posted by skellyo (Post 127593)

You'll need to find out what kind of taps are on the Neu packs first off. Typically, they'll either be Hyperion or Thunder Power. Once you know what kind of taps you have, you can either buy a balancer that is made to mate to that style tap, or you can buy a balancer and a tap adapter. I think the best thing to do would be to find out what style taps are on the packs and get back with us here so we can recommend balancers/tap adapters for you.

Hi all, I got my batteries, Now I need to know what else I need to get (first time using Li-Po's) I have read that the "Blinky" works with the Neu batteries and the "ICE" charger?? (I have a "ICE" charger) Now I have a dumb question. Do the hard cases come off to charge the batteries?? One more question. where do I get the male connectors like the ones on the Neu's

gixxer

11.26.2007 12:10 AM

well I asked about the plug on another forum and this was the response from steve neu.

Kokam type plugs fit our batteries. We have adapters for the Bantam Chargers we sell. The pin spacing is the common 10th inch so balancers like the Astro Blinky will work without a adapter.

Steve

mmdooley

11.26.2007 12:33 AM

[QUOTE=gixxer;131615]well I asked about the plug on another forum and this was the response from steve neu.

Kokam type plugs fit our batteries. We have adapters for the Bantam Chargers we sell. The pin spacing is the common 10th inch so balancers like the Astro Blinky will work without a adapter.

Steve[/Q

Thanks Steve, I am going to get the "bkinky".

aqwut

11.26.2007 12:48 AM

the blinky works flawlessly... I love it..

dadgummit

11.26.2007 12:09 PM

Being new to the Lipo scene I figured that the Hyperion 0610net charger with the built-in hyperion balancer was a good deal but the Neu balancing tabs are not even close. All neu says is standard 1/10th inch which means little as no-one who makes balancers says their tabs are standard 1/10th inch (at least none in my searches) Does anyone know what balancer-tab adapter I will need and where to get it. Thanks

gixxer

11.26.2007 01:17 PM

according to steve neu, they take the kokam adapter. I just ordered this based on the advice of someone from rcgroups. http://www.allerc.com/product_info.p...oducts_id=3160 but dont have it yet to verify.

aqwut

11.26.2007 02:09 PM

unitedhobbies.com has a snot load of different type of balancer connectors.. and cheap too..

All times are GMT -4. The time now is 01:27 AM.

Page 3 of 4

Show 40 post(s) from this thread on one page