well lets just say I hope my dream comes true tomorrow when I receive my coveted emal from CC.Thanks in advance Patrick:party::party::party:

Trust me. You have nothing to fear. I know he didn't answer your question in the very next post, or the next one... Did you ever stop to think that maybe he didn't have the answer at the time? Or, he simply did not notice your post? In any case, I think the question has already been answered. Have fun with your V2! :mdr:

I've been waiting patiently for it and I'll continue to do so. I'm still going to wait until you guys beat the crap out of the new units before I get one :lol:. So just grab a beer (My Doctor recommended 1 beer or glass of Red Wine a day :drunk:) or a soda if you are under aged and relax a bit.

Your item arrived at 3:14 PM on August 3, 2008 in ROLLING MEADOWS, IL 60008,,,

Whatever it is its friggin 1 mile from me sitting in the post office. Ill have it tomorrow unless I get my maglite and rambo gear on tonight.. nah federal offense. Tomorrow it is !

Not if I get there first :whistle:

Ha! I've got a 5000 mile head start on you! :lol:

my "lollipop" inquiry to Patrick was a polite way of saying " Ive been waiting 3 months for my MMM- will there be any perks coming along with it?"

Alright, get up and ready, have a shower, have your morning cuppa. Youll probably get there early, but maybe if the person working is too they'll let you in before official opening hours and you can crack it open and see if dreams really do come true...

Man its annoying to subscribe to a thread just to keep reading about a bloody lollipop comment!
I want news, or driving reports :yes:

Wow had to read up on this one. Computer was down. People just need to chill out. This is a hobby to have fun so have fun.

Via the postal tracking center on my CC package. I assume I will see this today.

Are you sure it didn't say Your item arrived at 7:20 AM on August 4, 2008 in Auburn Hills, MI 48326. I could use a free MMM. :lol:

The perk will be that it works (finger crossed, again)....

I know its frustrating, but sometimes in life things dont always work out perfectly, so you just have to accept it and wait for the problem to be fixed; no rewards for being patient unfortunately.:wink:

Its back !!! We are back in business gentlemen...I dont think its my original one because it doesnt smell like death, but they sent me back my old connectors and new ones for the new MMM. P.S. sorry for the bad pics. Wife changed the shutter speed or something, dunno how to fix it LOL

http://i278.photobucket.com/albums/k...monster011.jpg
http://i278.photobucket.com/albums/k...monster002.jpg

Congrats JayJay!

Could you try it out and give us a detailed report?

It rained this early afternoon, but by the time I get it in, it should be ok for some testing. Ill get back with you guys in a few hours. Good news !!

Here's hoping mine ships soon, 3 months it's been dead. glad to see them starting to return to people. :)

Looking forward to the report on how it does! :yes: Its also great that it comes with those other wires to attach to the built in bullet connectors. :yes:

Great to hear that someone got theres... that means than it should be close for all of us that has been waiting for over 3 months now.

Awesome jayjay, should see mine from the postman in about an hour.

now i am really starting to wish i lived in america. wonder when mike will get his batch? he will be a very busy man this week!

Ok, I take it back. I just went and checked the mail and mine was here! I didn't get an email saying that it shipped so it was a big surprise. Now all I have to do is wait for a new case for my "brushless ready" transmission so I'll have something use it in.
Here is a pic:
http://img.photobucket.com/albums/v1...g?t=1217887229

Thanks Castle!!!!!!!!

Is it a personal preference thing with the rain or are the MMM's not waterproof, I looked on their website but it didn't state whether it was or wasn't.

I got mine today as well. It's already installed in my buggy. :mdr:

Has anyone else have the problem with Castle link? :neutral:

It ran good anyway. It didn't thermal in this 98 degree temperature. And that's saying something.

MMM isnt waterproof and I would just slide out and crash driving onroad lol.. Just finished installing it and charging the lipos up.

The castle link cued right up for me, but it said I cant get firmware updates for this controller with this version so I updated from 3.051 to 3.10 and it still was the same stuff ? I have the options same as Mamba max to adjust with though

I get the same error:http://img.photobucket.com/albums/v1...g?t=1217889913

Very nice of them to include the leads w/6.5mm ends!

Damn it. My package was the regular Mamba Max. I was hoping for the Monster's back. Owell, hopefully, it won't be much longer.

That's the one. :no:

The guys at Castle told me that the firmware on the MMM is newer than what is available on the website. This is due to the fan controller. It will be included in the next release they said.

I drove it for 27 minutes (till lvc) and alls good (26:47 longer than V1), MMM,9xl,Neu 30c 2x 2s 5ah, 24/65 (easy setup for 1st run, no 6s 1Y like last time LOL) the monsters temps never got over 108º* , 9xl 145º (*The highest I could measure with the case on, bit of a turd trying to guage it). The fan only went on twice and went off after a few seconds of me looking at it. It runs real cool. Humidity is retarded out here and about 85 ambient. Its smooth as butter just like before, no cog takeoff even at slow pull. Check out the video and restart the beginning a couple times. No cog at all and I was barely pulling the throttle. (wife cant video, missed my wheelie with sparks pfft) I think were back in business ! Congrats Castle.

http://www.youtube.com/watch?v=vD-XaeWVXXE

http://i278.photobucket.com/albums/k...mm9xl4s003.jpg

I think I just creamed my pants.

That's awesome. I can't believe I didn't get an e-mail today. Hopefully tomorrow. I have to wait 2 weeks for mine to travel the 5000 miles mentioned earlier anyway. I can't wait. The savage was stupid with the old MMM.

Thanks for the vid.....too bad Im not in the US and my MMM would be 2-3weeks away... :no:

Same here :cry:

Man! Mine got up to 150 degrees pretty quick. I think it stayed there but 108 is crazy cool. I'll be doing some more testing through out the week. :neutral:

Got my MMM today. Uninstalled the MM and mounted the MMM. Hooked it up to the Castle Link and set it to what I had the MM set to. Took it out side and ran it up and down the street where it ran great for about 4 minutes and then stopped .... just like the v1. I immediately unplugged everything and took it inside. I put it on my work station and plugged the battery back in and switched it on. It seem to come alive (unlike my MMMv1) but any throttle gave it uncontrolable cogging ... I unhooked everything again.
Now, what is really strange is that when my MMMv1 died on me and I found it was going to be awhile before I'd get it back, I re-installed my MM. After installing the old trustee MM I experienced the same severe cogging. After checking everything out I determined that it was the Neu 1512 1.5 that was the problem component. Since it was still under warranty I sent it back to Neu where they prompty sent me a replacement. I installed the new Neu with my MM and everything ran fine until today. I ran my Jammin just yesterday with the MM and Neu and it ran fine. Now I'm wondering if the MMMv1 caused the problem in the Neu ... I mean this is one hell of a coinencidence. I'm not sure where to go from here, I have another 1512 never used and of course I stll have my MM. I think I'll uninstall the MMM and install the MM and see what happens. I'll be calling CC in the morning and see if they can shed any light on the subject matter.
Just for the record, I was using a 4s 3700, and am not using a/the BEC. I'm running a short RX extension cable with the red wire cut so the MMM has not been modified. Also keep in mind this setup was running flawlessly for over a month with the MM and ran perfectly for about 4 minutes with the MMMv2 so if there was a wiring problem it would of never of ran. I'll report back tomorrow after I talk to Cc and try a swap out of either the Neu or the MMM.---------------------------------------------------------------
Jammin X1CR, Neu 1512/1.5D, MMM/MM, NO BEC
XTM/XT2, Nemesis XL, Hydra120, NO BEC
2 FireFox 4s 3700, 2 Neu 4s 5000

Colby i saw your post over at RCTech as well .
Hopefully it is something simple and maybe over looked and not the first death of a v2 :cry:

Yes, I do to. I think the first thing I will do is to switch the MMM out for the MM. If the problem still exist I'll switch out the Neu. One way or another I'll have more to report on tomorrow.

Good luck my friend , i think we are all waiting with baited breath .

I couldn't wait til morning ... had to try something tonight so I could give CC tech support more insight tomorrow. I unplugged the MMM; didn't uninstall, just unplugged from motor, RX and battery ... and with the MM laying on top the MMM I plugged it into the motor, RX and battery. AND everything worked fined so it's not the motor and seems to be the MMM. Gee, I don't know if that's good news or bad news.