is that a nova in the back ground?

The white with a green lightening bolt on the side. Yes it is. It is my brother in laws drag car. No motor. been a 7.20 in the 1/8 mile.

whats it run in the 1/4?

Just got a timed run on a 9xl with gp 3300. The batteries charged up to 2934 in one and 3052 in the other. Run time is 15 mins. It is probably under close to race conditions. I tried to keep truck going at a good rate. Donuts and power slides. I hope this helps.

Okay! I got my new motor for it. I going to a 7xl feigao. My new crime fighter tires are in as well. I ordered up a center diff for it to. I will have to get back to you on speed. I want a video of the 7xl.

Okay! change of plans. I have took the aluminum tranny off. I have mounted a center diff in it. I have to wait on a couple parts to see how it is going to go.

Its looking very good, whenever i look at your truck its taken apart:p Where did you get that center diff?

I got the diff off ebay. I made the rest over the last couple of days. I am hoping the my motor comes in and mike gets my other parts shipped out. I am curious to how it is going to do. I have not drove nothing with a center diff. I will find out when finished. thanks for the kind words.

Cool have you seen the new one peice extinion from UE ?.

http://www.unlimitedengineering.com/...=14319&acon=39

It's a 1 lb solid billet of 7075-T6 Aluminum that's machined down to weigh a mere 68 grams.
Full stress analysis and optimization was done to ensure that it is up to our high standards of strength and durability.

This will fit any Maxx style chassis which has the stock mounting holes.

Another MUST have..

Thanks Papa!! haven't seen it..

Any idea on the price? i guess a 70 dollars..?

Thanks papa that was my first attempt at posting a link.

So will it work with a gorillamaxx chassis?

The price info ect was on the thread on the ue website,

theres a link on the page before this ....

which went pretty well Hippie..

@guerella;

one page back, is a link to the UE forum, robin tells the answer to your question. (in the same post he does the 60 dollar privequote, which is not sure)

it wiil fit any t or emaxx style chassis. Serum thanks my link posted the words but not the pics,

The thing that I find most appealing is the ability to run any skids that your application requires. In my case VBS.

That thing that I find appealing there it that you may be able to run more than one. If you mount to together you can run twice the extension on one truck and have it adjustible.

I got the motor plate ready and mounted with motor.

YEAH!!
nice and LOW

lol, wats with u and low rc cars?

With that much power, you dont want them to wheelie too much...

Cool that looks very good.

Huge! Looks nice! Only wish that I could afford that motor.

Nice, Coolhand! That's how I always imagined it.

How did you choose the right wind motor? To what speed have you calculated it?

You don't want it to flip over like a lunchbox, do you?

I just figured in the cell count and kv the controler i was going to run. the gear ratio and it all come up with that. I got some help from promod. Thanks promod. I have not really calculated on speed yet. The motor has a hi torque rating so the gear ratio on final drive is a little lower than any other truck i have ran. I won't be able to test until next week if luck.

Here is a little calculator to help you out.

I had one that ran off windows excel. I don't have that so it didn't do much good. I check it out.

lehner 2250

This is one nice looking lehner.
I am very curious how it performs.
Maybe wen I get used to my wanderen 9XL, I will get my self somthing like this to.

If you give me a little time I have to finish it up get it tuned in and then I going to try a video of it. I should be able to run in the 20 on cells. I am going to experiment with this as well. I not sure on the gearing so I start at one spot and keep and eye on it. I got the last few parts coming now. Hopefully it will be running by the end of the weekend.

Can hardly wait on that video:C:

What controller are you going to use.

Good luck this weekend then.

Controller is a 36 120 bk. It has a 42000 rpm limit so I have to keep an eye on that. The motor is only 1134 kv.

I got the truck together today. It took it out for a test spin. Man is this thing awesome. :D I can't hardly put into words what this motor is like. I like the center diff as well. I got a couple pics of the truck. I do not have my extra long extension in front. I dropped that for I didn't have dog bone to run it at the time.

Yes i know the truck is dirty. I know the wires are not organized. I have a new esc coming to go on it so not worry on wires. I was excited to drive. This is a after shot and hadn't had time to clean it. I love this thing man.

Nice Leroy!!

very nice..!!

Please get us a movie!

Nice one, Leroy. I want a center diff too.

You drive 16 cells there..?

Whats the divrence wiht this motor compared to the wanderen 9XL is it faster?

It looks verey nice..:cool:

cool CHC!! thats real nice! Is there a cover for the pinion and spur gears? or is it ok open?

Open is okay. Look at 8th scale buggies.

Oh yeah, true. I just think that with it open how come no dirt or little rocks get caught up in there when its going