Okay, can you advise me ?
thanks you

Sure! :lol: How about this one?
http://www.rcplanet.com/Pro_Line_Che.../pro324800.htm

Yes, it's great, I will buy the both .....
thanks you

The differential with the avidrc's bearing
http://img118.imageshack.us/img118/3...3651wx9.th.jpg
http://img48.imageshack.us/img48/5760/img3653cr3.th.jpg
http://img181.imageshack.us/img181/4...3654hp8.th.jpg

My power supply from a computer, about 16 amps
http://img110.imageshack.us/img110/1...3655ph7.th.jpg
http://img123.imageshack.us/img123/1...3664mt4.th.jpg
http://img294.imageshack.us/img294/5...3656ch0.th.jpg

this week end the first run :na:
thanks you

Gone, that is sweet:surprised::gasp:. Great skill. How much do u charge per hour:lol:? I want u to do a conversion for my savage.

hello, I have some news, my mgm burnt...........
http://img382.imageshack.us/img382/1...3689ht2.th.jpg
http://img297.imageshack.us/img297/9...3690dj7.th.jpg
http://img147.imageshack.us/img147/6...3691xy3.th.jpg

Oh bugger, thats never good. I expect MGM will warrenty it though hopefully.
What happended exactly- before, during or after running the truck?...

I didn't know you could smoke a speed control after running a truck. Well, just one more thing to look out for I guess... :eyes:

My sympathy
 

I just lost my Quark 125, I feel your pain, I smell your smoke!

I do notice that the blown caps are on the same side as the covered heatsink. tisk, tisk

So do I. Smoked my MM yesterday. Another setback on running my Hyper ST. :cry:

Heh, I've seen a couple Hvmaxx escs that smoked after being ran- they were left with the batteries connected, and something inside smoked, melting the case and pcb....

That's Novak though... :lol:

Ouch dude.. that hurts.... Any videos of the truck running when the damage happened?

Reason to get mmm :oops: Welcome to the line hehe.

No, I haven't got video....... I send my controller to mgm with the motor, wait and see. Thanks you

hello, some news, my controller is definitely dead, the outputs from motor (I mean the wires which come from motor) has "pushed out" its isolation. The vibrations caused that and wires that come from motor to controller touched on motor frame (motor skeleton). two of motor outputs touched in same time, this caused short-circuit between phases and this damage the controller. So I have to buy a new controller, witch controller will be the best, MMM or mgm 224-18 or an other ?

Thanks you

MMM, all the way. With the revised BEC design I see no reason why it wouldnt be the best choice for a ~200amp 6s lipo esc.

http://img84.imageshack.us/img84/9333/spa0045je2.th.jpg
http://img512.imageshack.us/img512/2...0047jv6.th.jpg
http://img512.imageshack.us/img512/2...0049uy5.th.jpg

some news with my controller from rc monster

Looks very nice!

thanks you, according to you, can I keep the internal bec? with my 6S lipo, I have only 2 servo...

Yes. You can use your internal BEC, providing your 22418 is the new version, shown here:
http://www.rc-monster.com/proddetail...22418CP&cat=21

okay great :), thanks you

No problem. :smile:

Nice truck sucks about the controller. I think I am going to get that controller as well. Should run everything I want.... at the same time.

I hope too.......

No it's finished, I have aleready burnt 3 mgm, today I run all the afternoon, and I decided to do a last pack, but see
http://www.dailymotion.com/group/3549/video/11124765

Wow dood that sucks the big one. Thinking of selling? Man your brave and you move fast. Was it the motor?

Three was my limit too.

It's too much..........

what is the answer from mgm?

Any updates?

Yeah, also interested in updates. I am now running the Nemesis at the local track in the un-limited Monster truck class. So be interesting...first race of the year if this weekend.

Id like to know too what happened to this monster, also like to know about the Aqwuts g.s.t project. Never really saw it running..

I have also done conversion from Cen Genesis, had a thread a long long time ago in here. Run it couple times, but it didn't run well. I might continue my project , had some thoughts about putting alloy Emaxx tranny in there. So it would be much easier to gear and mount the motor..
Basically Nemesis, Genesis & GST are the same car with minor upgrades..


Edit:.
Hehe the thread was still here, heres link http://www.rc-monster.com/forum/show...ht=cen+genesis

I put a 20t pinion with the stock 1st gear spur and locked the tranny. Truck is awesome on 4S and especially 6S. At our local track it has no problems running around the track putting down decent track times so far. We'll see how it stacks up against the E-revo's, MGT's, and Brushless Savages as well as the Nitro ones.

Nice, sounds great! I have to see some pics! Could you post some? Maybe a new thread?

Anyone know if there is an decent brushless conversion kit for the Nemesis/Genesis/GST available? I admire these custom CNC machined projects, but I want a bolt-on solution if available...