Ten-T CF Short Course Chassis
 

Anyone have a spare chassis they can send to John at MoosRacing? http://www.moosracing.mono.net/

I sent him an email about a custom length Ten-T chassis for Short Course, he said for $100 he could make a custom chassis, he just needs a template to start with.

I would like some general concensus on the exact lenght the chassis should be streched, or even if this project is worth it...

Droop screw plates would be a nice addition too, and maybe only the holes for Mikes battery tray (nitro delete).

Here is the thread on the Hyper 9 that inspired me.

http://www.rc-monster.com/forum/showthread.php?t=27360

http://www.moosracing.mono.net/upl/9...cing3290_0.jpg

http://www.moosracing.dk/images/models/771863.jpg

If you have a Ten-T, take yours apart and send it to him. Sacrifice a little to gain a bunch...

Now I know why your center Berings are going out... you drive in the most HARSH condition available.. big rocks and fine sand.... nothing will last! Have fun!:rofl:

This is 100% what we need for a SCT conversion with a carbon rear dif shaft.
This is a great post thanks maby i'll give him a call.... :intello:

I live in the same country as john, but the chassis is in use XD Will ofcause do it if i get a free carbon chassis XD

the bearing was because of the motor mount, but f... it.


Been to a rc meet up today, and the battery/esc tray fell out again!!!!!!!!! So fuc*ing pissed

Did the incerts come out or did you loose the screws? :oops:

well was held by 1 screw... the gold things the screws go into stayed with the screws.. so bad making once again + the motor mount is bent.

How much pain do i have to go throu before mike shippes me a new conversion kit? It must be clear to the blind eye that my kit has not been made as well as all the other ones? or do all you other people drive slower than nitro cars?

Remind me to never sell anything to you. :whistle:

How many little stones travel through your spur/pinion durring your rock road bash sessions? Speaking of blind eyes i'm suprised you dont have two from your doughnuts:lol:
Get over it, Mike owes you nothing

I agree with bryan...

I would take pics of anything you think is bad , bent or brokin. Then I would nicly explain what I was doing at the time of the problem that ocured...
Foward all the info to RC Monster..... then go from there! :yes:

I've worked on the rear bumper. I am using a Slash 4x4 bumper, borrowed some ideas I saw on other forums. It's pretty easy really and I don't think it looks to rigged. Although my dremeling of plastic skills suck.

I plan on using the wing mount as the body mount/rear bumper tie in. Looks ok so far.

I ordered a RPM front bumper for the Slash 4x4, I also emailed T Bone Racing about making a front bumper like their Hyper 10 SC, http://cgi.ebay.com/ws/eBayISAPI.dll...m=120572260481 but with the Ten-T bolt pattern, waiting to see what they say.

There are some great idea's here,keep us informed on what you end up with on those bumpers:yes:I haven't read all the posts, but I noticed a lot of people using different wheel adapters so they can install SC wheels and tire's.I'm not sure if this has been addressed,but I pulled the wheels and tires off my Traxxas Slayer which are 14mm hexes and they were a perfect fit:yipi:

Whats the offset on those Slayer wheels. From what I've read to get the wheels to fit under the body we need to use the Pro-Line ProTrac 0mm offset wheels, it requires Slash 4x4 hexes (12mm) and some dremmeling/drilling. If the Slayer wheels are by chance 0mm offset that would be great.