RC-Monster Forums - Step-by Step building the ultimate GRR3 E-Revo!

Page 4 of 13

« First

Last »

Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- GorillaMaxx (https://www.rc-monster.com/forum/forumdisplay.php?f=16)

- - Step-by Step building the ultimate GRR3 E-Revo! (https://www.rc-monster.com/forum/showthread.php?t=11434)

TDC57

04.18.2008 05:16 PM

Quote:

Originally Posted by Gee (Post 164270)

Man that is nice Shawn. Every time I go through your build I keep thinking I should of did that too. Looks like it going to be damn tough with the diffs you got. I used some lexan under the motor on my g3r also. I have the mm so it doesn't fit under the motor but it close to it. I cut a little part out and installed a small fan that blows up from the bottom. Needed it with the Novak but the Neu is running cool. So now it just a hole in the lexan with a fan. I'm on my second stock differential. I wish I would of got the diffs to begin with.......

I'm running 54/26 on my G3R Neu 1515 1/ w/ 4s same tranny but diff are stock. I haven't played much with the gearing once I put those on.

Hay Gee..
I’ve seen your build (it’s awesome!) inspired me to build mine.. (Don’t kid yourself)..

Thanks for the gearing suggestions..

FYI..
I just received my body a few minutes ago and I'm confirmed with Mike / Fast lane for the show tomorrow! :), I'm showing casing two of my builds there (dream come true) :yipi: of course I’ll be up all night getting them ready. &!!! my MGM controller came to life this morning:party:..

Good times ahead.. Good times..

It's always pleasure and have a great one Sir
Shaun.

TDC57

04.18.2008 05:21 PM

Quote:

Originally Posted by ChriZtoffer (Post 164201)

That's a really sweet ride! :mdr: Looks a little like mine. I hope you will be having really fun with it, at least you should! :yes:

Thanks ChriZtoffer!..
I checked out your and that's one hell of build you've got going too..
Any new updates yet?? I think the last one was back in Feb??.

Yea the controller just came to life and my body arrived today so I’ll be beating it this weekend.. THANK GOD.. I'm looking forward to seeing if all my hard work and $$ spent was worth it..

I'll keep the team updated as the bashing commences..

Have a great one.

Shaun.

TDC57

04.18.2008 05:23 PM

Quote:

Originally Posted by magman (Post 164190)

I have a t-maxx and have changed it two times...stock, installed the Dynamite.28 kit, and now brushless...(almost done). For me it almost as much fun to upgrade these trucks as it is to run. Now, when I am finished w/ my upgrade, I won't have to wrench on it as much!:smile:

I installed what I thought were upgrades to make it "bomb proof", in reading these forums, my perspective on "bomb proof" has drastically changed and so have my upgrades...my point is if you REALLY want to have fun, you need to pony up the cash for the best of the best and then and hopefully then...no worries!!! IMOP:lol:

:yes::yes: agree 100%.. I hope to find out this weekend and put that saying to the test..

Thanks for the words of wisdom and advise..

Have a great one Magman..

TDC57

04.18.2008 05:27 PM

Quote:

Originally Posted by xcntrk (Post 164202)

I think that’s probably a good start. It seems high initially when coupled with the Emaxx 2nd gear and 1/8 diffs, but when you combine it with that low KV Neu motor barely turning 30k on 6S, I think you could probably run whatever gearing you want and not have to worry about excessive heat.

Hay xcntrk!.. That’s what I', hopping for not to hot of an application.. I'll just need to keep my eye on the temps for a while and experiment with different setups. I'm glad to hear that at lest my starting point wont be a bad place..

Thanks for the advise..

Have a great one..

Shaun.

JERRY2KONE

04.18.2008 05:29 PM

Junk.

Hey TDC57 That thing is a piece of junk, and you need to just throw it in my trash can. I will take care of it for you.:lol::rofl::lol::rofl::lol::yes::rofl:

TDC57

04.18.2008 05:32 PM

HHHhhhhaaaaAAAaaa Hhhhhaaaa Yea... why didn’t I think of that!!

Thanks for the laugh... I'm mean suggestion..

Have a great one!

JERRY2KONE

04.18.2008 05:35 PM

I would love to be there to see you get that thing dirty. Have fun and get us some videos and or photos. That is one very nice build Dude.

TDC57

04.18.2008 06:00 PM

Thanks Man.. I will defiantly be posting some vids of her rolling under her own power.. I'm also going to be taking pics from this weekend RCX expo this weekend so I'll post some of those as well..

Mike (RCM) and I are also going to get together for a bashing session (that will be cool) I've spend tons a $$ with the man but never have had the opportunity to meet him himself..

Again thanks for the kind words and I loved your earlier email!! Totally made me laugh and it put in me good mood for the rest of the day..

Have a great one..

Shaun.

JERRY2KONE

04.18.2008 06:09 PM

Quote:

Originally Posted by TDC57 (Post 164309)

Hey you cannot blame a man for trying.. I know how you feel. I have two rigs that are worth about $3K and two worth about $2500, and I am still working on getting all of the electronics together to make them run well. Thats ok, there are a few guys on here that keep me in stitches, so I like to give back when I can. That is one of my gifts, is to make people spit from laughing. there are a few people on here with that gift, Pimp, Paralyzed, just to name a couple.

MetalMan

04.19.2008 02:09 AM

Nice job with the MGT spur :yes:

TDC57

04.19.2008 04:51 AM

TDC57

04.19.2008 04:52 AM

http://i264.photobucket.com/albums/i...7/IMG_2495.jpg
http://i264.photobucket.com/albums/i...7/IMG_2496.jpg
http://i264.photobucket.com/albums/i...7/IMG_2497.jpg

P.S.
yes i got my body from SickLidz! it's just placed on, I'll ream the holes and install it at the show..

Have a great one!..

Shaun.

TDC57

04.19.2008 04:53 AM

Quote:

Originally Posted by MetalMan (Post 164403)

Nice job with the MGT spur :yes:

Thanks Metalman!, that the gear you sold me last wek!.. :smile:

JERRY2KONE

04.19.2008 05:11 AM

Yo Tdc

What a coincidence, my FLM Maxx look almost indentical. Except that I have the GA titanium bulks installed. I still have not painted my body for it yet. Your lucky to have such an event to showcase yout projects and your skills in guilding your toys. I am sure that a lot of the kids will be drawn into the hobby just getting to see such works of art. I bet you cannot wait to get into your next build now that this one is completed. Of course one needs to recover from such a huge loss of blood $$$$. :gasp::rofl::yes::rofl::yes: Good luck at the RCX and give us some good photos of the show since not all of us can attend:eyes:.

ChriZtoffer

04.19.2008 12:32 PM

Quote:

Originally Posted by TDC57 (Post 164283)

Thanks ChriZtoffer!..
I checked out your and that's one hell of build you've got going too..
Any new updates yet?? I think the last one was back in Feb??.

Shaun.

Yes i will be posting an update later this weekend. The truck is almost done by now, but i have been busy with alot of other things and therefore haven't been able to post any updates. :)

All times are GMT -4. The time now is 06:13 PM.

Page 4 of 13

« First

Last »

Show 40 post(s) from this thread on one page