Originally Posted by lutach (Post 211255)

My PM box is full. Please e-mail me (brasuca2478@hotmail.com) your phone number and I'll give you my info.

Originally Posted by SpEEdyBL (Post 211464)

You are going to need more than 5000 mah 25c batteries if a 1.5 turn hv motor is going to be any use at all. I would recommend at least two of those in parallel. My hv 4.5 already taxed my maxamps 5000 mah batteries and a I imagine a 1.5 turn would have the capability of drawing three or four times as much current even with only 2s, compared to a 4.5 turn on 4s.

Originally Posted by NovakTwo (Post 211489)

When is your speed run and where? If you have any other info on the esc it might be worth posting it----if this combo just won't work, it would be better to discover that now.

If Bob or Steve have questions about the controller, I will have them contact you privately at this email addy.

I have the order ready to go.

Originally Posted by lutach (Post 211500)

As soon as the motor(s) come in, I'll start the runs. I've been testing with a 4.5R and with 35/69 gearing in my TC3 it went only 65mph in a short test. The 200A ESC is on the way and it should be fine with the 2 winds mentioned. If that ESC isn't enough I'll just find a way to strap the big dog Schulze 40.160 and let it all out. I can place the order right now for a 1.5T and a 2.5T, but they must have kevlar wrapped rotor (Or any other high strength fiber such as Spectra) and the strongest magnets on them as well.

Have someone who handles the orders contact me via e-mail and I'll either call or e-mail the appropriate info for them to get this done as soon as possible. I'm really serious about this and if there's anything Bob or anyone else would suggest for the motor before they get built, let us know.

Regards.

Originally Posted by NovakTwo (Post 211505)

Hi Lutach....I have forwarded your comment to Bob and Steve.

I think you missed a couple of my posts above:

We will only wind a 2.5T HV Pro motor

We will not wrap it with Kevlar/epoxy, but the magnetic material in the HV rotor is our highest temp magnet and it is the only rotor we (have) use in the HV motors.

When do you plan to run this and where?

Originally Posted by NovakTwo (Post 211516)

Bob said that will do the kevlar wrap.

Originally Posted by snellemin (Post 211520)

hmmm getting more interesting.

Originally Posted by TexasSP (Post 211521)

This is getting interesting for sure.

Originally Posted by Arct1k (Post 211529)

But we know where you live...