So what's the news on these adapters? I wanna put 1/8 buggy rims on my crt.5

Haha. No kidding. We went from talking about adapters to talking about signatures.

+1 on these if they fit the ste

Any news on these adapters? Are we close?

I don't want to buy any more 1/10 truck tires if I can use my 1/8 buggy tires instead.

2 weeks they should have them on this website forsale , i just contacted flm today and they are in testing , thought you all may wanna know

I'll get a set of those. I have a few sets of 1/10 truck wheels for my RCM crt.5, but I'd like to try some of my 1/8 buggy wheels too. However, 1/10 truck wheels are already hard on the wheel bearings and a-arms.

hey guy's i should be fine with these on my hyper ste right? if they fit the crt.5 .. should all be the same ?

Sorry for the no response... the forum did not email me so I figured nobody had responded (I was wrong lol).

I just emailed Jamie again as I still have not received the test pieces. Hopefully soon!

Mike

Just heard from Jamie and the hubs are heading my way. Depending on what day they get here I will be sure to give a full review and get some pics up. I am gone thursday evening through sunday evening but will do my best!

I have various 17mm tires so I will post pics with all so everyone can see the sizes. I have a few different mod 1 pinions so will test out the larger sizes and see how they do on 2s/3s on a VXL motor with the MM.

What are the offsets on the adapters or do you know yet?

Each adapter is +1 inch PER side. I had him do this as 99% of buggy wheels out there are 0 offset (the hub mounts to the outside wheel face). If you were able to mount this on the stock hex it would narrow the truck by almost an inch. I figured this way it will actually widen the truck about 3/4 of an inch (maybe an inch) total which should help handling/stability.

The only thing i'am concern is about the longevity of the hub bearing:oh:
This setup will place alot of stress on it:whip:

I have been running Slash adapters on mine even though the hole is a little big on them and I havent had any side effect or anything out of the ordinary yet.

They buggy wheels and tires do work awesome on the little .5 though. I will definitely be getting a set when they become available.

Yah the hub bearings are tiny on the crt.5 and get blown out easily by 1/10 truck wheels. At this time I'm holding out on any crt.5 mods till the new Ofna Blitz comes out that is supposed to be based on the Hyper .5

Thats the 4wd corr truck aint it? Is it supped to be nitro or electric?