yes, I will be using an MMp.


RC4wd has an awesome sale on TI screws right now ;)

hi there

i own a 808 2010 and this week will come my 808e. i am thinking about try a 3s set up with 3s hardcase lipos ( 3800 45C 11.1v 360 gramm) and a NEU 1412 2750kv) and a mmpro controller
this would give a good weight i think

i drive always 4s with the tekin motor in my buggy. it runs great, but my old electric buggy ( asso rc8be) ist toooooo heavy for a buggy.

so is 3s no option?

How Light is your buggy?
 

Thank you for this information, I was going to run Titanium, before it was suggested to me by a pro racer to give Aluminum screws a try, and to only replace the screws that break(if any) with a stronger material screw.

That's awesome, 3cell with 1412 1Y should work great. That's the first motor castle creations suggest to me, before I asked about the 1409 1Y 3600kv, which is insane fast on one 3cell lipo Thunder Power 50c 5200mah. And temp range is from 125 degrees to 151 degrees, which is great.

PS. A 3cell lipo should work great with your setup, super fast, and definitely lighter than a 4cell Lipo of same mah, capacity.

PPS. How much does your buggy weigh?

race starts in 12hrs:sleep:

the CF chassis weighs more than my 808 chassis, but having the alloy chassis at 1.5mm in places is never good...
http://i272.photobucket.com/albums/j...8/IMG_0519.jpg
http://i272.photobucket.com/albums/j...8/IMG_0518.jpg
http://i272.photobucket.com/albums/j...8/IMG_0517.jpg

Awesome Buggy you have there.
 

That's one sweet looking buggy. Thank you for posting these pictures up. Great Job, Very Well Done :)

hi there

it was a little bit boring today becase i am waiting for my xray 808e.
so i go and try the complete middle diff with motormont, middle diff and diff holder from the losi brshless truggy on my xb 808 2010. with modifikation it will fit and the next good thing is. i can drive my smart diff and plastik spur gear from the losi truggy on it. the 808 buggy has like the asso rc8 b the truggy ratio. so it will fit

the next cool thing is, that the losi batterx holder will also fit on the 808. so i cancel my order for the new 808e and try my bild with the losi parts. i just need a body. i thing the body from losi will fit. but i hope i can get this nice new 808e body

pics will folow when i start with the work

Cool, can you please also post pictures of all these parts you mention you will be using as well :)

White, your chassis was actually heavier than stock?

because the stock one is 2-3 seasons old and worn down to 1.5mm in spots...

that makes sense. Thanks, Whit. I think I'm about to give up on the whole carbon chassis idea...

hi there

i have make my own 808e wit losi parts, losi center diff and motormount.

i have make a plate for the mount. my oroginal 808e comes this week, bt htis one is cool too :-)
the battery tray fits perfekt.
this weekend i will try both. my 808e and the original. i hope i can get a plastic spur gear for the xray conversion, i hate metall spr gears

in 3 weeks I went from middle of the B to 2nd qualifier in the 1/8 class...:yipi:



has there been any solution to the rear pinion bearing problems? I'v had to replace mine every other week:gasp:

the MMP+1400+5s 4100mah combo has been getting me 15min but the pack is D E A D after that race... I would bump it to 6s, but finding a 4100mah EP neu cell is proving a little difficult:whip:...


buggy wights 3498g with my 4100 5s, and 3443g with my 6s 2650mah

AKA 7.7lbs, and 7.6lbs:na:

I could easily drop another 1/2lb if I would clean it, get a new body(covered in shoogoo) and spend some time/$$ lightening a few parts...

I'll just leave these here...

http://i272.photobucket.com/albums/j...8/IMG_1068.jpg
http://i272.photobucket.com/albums/j...8/IMG_1069.jpg

I made 26min on this buggy with a hyperion 4200 6s....:party:

Thats awesome whitrzac! Are you going to run this setup outdoors at MARCCA this summer?

PS: My Iota DLS-27-25 just arrived and I have a Powerlab 8 on order. I look forward to 21 amp charges on my hyperion lipos. :intello: