How are you doing Manne? Still improving the Savage? E-revo also perhaps? :)

Hello Ola! Sorry for the slow answer!

Yes I am, actually I have a new setup on the truck now, I was supposed to post it a few days ago but I just couldn´t find time to do it:neutral:

Yeah, I did put togheter the revo about a month ago...To just give it a shot once again, after four packs of lipos the front diff gave up........

The savvy is still using the diffs it came with:party: shimmed with alot of care ofcourse and very well taken care of but still the same!

How about you? Is the truggy still going strong?:whip:

Sounds great! Do post youre new setup as well :)

The truggy is still running strong.. Too little driving this summer because of work, but i think ive put it through approx 35-40 packs in total now.. 5s 5000mah.. A couple rims and a body has been wrecked, but thats about it :) Rear diff was popping today though :( its reshimmed now, so it still works, but ive orered a new because the old one looks worn out.. Should have serviced and reshimmed it before, but a 24 buck diff i can live with after all those hours :)

Better Late then never!

Ola:
Well It looks like the truggy was the right way to go for you then:yipi: I can´t say anything more than that that car is just plain awsome. Keep on bashing:whip:.

Update:

The new setup.

Using stock radiobox and stock motormount with the revo gearbox
http://cdn04.dayviews.com/100/_u2/_u...27054557/f.jpg

http://cdn04.dayviews.com/92/_u2/_u3...1327054565.jpg

Covered the holes in the front of the motor also
http://cdn04.dayviews.com/91/_u2/_u3...1327054561.jpg

Well, this setup seems to be bulletproof, it has taken some SERIOUS beatings and major air since I did this, I consider the truck done now, all the weak links are gone.

Now it´s time for a rebuild so It´s ready for the summer.

Will be ordering a new body, new wheeliebar, new front and rear skid and new "flexmounts" for the bumpers, new drivecups, driveshafts, tires and some other stuff.

There has been some videotaping and fotage taken this autumn from the gravel pit that I will post later on... I will try to not have such a big gap between now and the next update as the last time I posted something:lol:

Interesting build.
Seems the truck does take a pounding.
I used to like my savage kind of wish had kept it.
Why didn't you get a FLM chassis instead of other brand?

Thanks.

Yeah, It´s a great truck.

The Tcs chassis seemed to be the most rigid chassis for the price, thats pretty much it, why did you wounder? :)

More curious then anything.

Wow, haven't been here in a while.

So, questions:
1. One of your original complaints about the Flux was that it was a "fat pig", yet you've actually made it a lot heavier by sticking the stock plates inside the TCS TVPs. As far as I know, NOBODY has ever managed to bend or break a TCS plate yet. Plus, the reason you had problems with the stock plates in the first place was that you removed all of the cross-bracing that makes the Savage line so strong when you took out the radio box and motor plate. Having the stock sandwiched in there is just pointless weight.

Second, you've missed the best proven handling improvements for the Savage, which are simply lowering the truck by means of an internal spacer in the shock, and getting an XL-length chassis. TCS makes a good one, or you can do like I did and order a set of XL-length carbon fiber TVPs from Platinum RC. They weigh less than the stock 2.5mm plates, and they're as strong or stronger than the TCS pieces.

Very long time no see!

Will post some bash pics, and some video clips later on..... I have them just haven´t uploaded them ( I don´t have a youtube account yet...).

Ascender:

This is why it isn´t pointless to use the tcs chassis with the stock chassis: Look from 3.45 http://www.youtube.com/watch?v=09FbKPKRBvo :wink:

About the crossbraces, I bent the crap out of the truck in places where the braces didn´t do any difference. Like in the right rear section where the motor sits on a stock flux, in the thin section. My friend with a completly stock flux also bent the living crap out of it and he had all the stock braces, bent it in the same places as I did:party:.

Thanks for the tip but I didn´t miss the XL length or the spacers in the shocks by mistake. I like high rideheight since I drive alot in rough gravelpits. And I like it short to easy make backflips and doing wheelies.

The main concerns that makes a stock flux "fat" is the crazy soft super sloppy sarvosaver spring, the thin shock oil combined with the stock mushy tires with non offset wheels.

I know that I have those big fat sloppy tires in most of the pictures, they soak up bad landings soo good so I like them for that, they also help alot to nail those tripple backflips:whip:. But I also use a set of crimefighters when I want it to feel more "racing", jump long and steady without backflips, turn good and drive fast.

Ola please be here somewhere, I want to hear about the Rc8t, still going strong?

Keep on bashing everyone.:party:

Update:

Finally! Movietime!

Pretty chill but amusing driving in the gravelpit:party:
Link: http://www.youtube.com/watch?v=m4QTjThVgAI
[YOUTUBE]http://www.youtube.com/watch?v=m4QTjThVgAI[/YOUTUBE]

Tell me what you think, this is the first movie i have edited so all critisism is welcomed to make it better next time.

Keep onn bashing:intello:.

Thanks for putting that up, there's some fun stuff in there and good driving. Nicely done for a first effort.

Good to see a practical truck build aimed at bashing.

Thanks alot:party: We´ll see if I get to do a better one sometime soon:whip:

Just ordered some parts, New body ( ford f-150 ) some pro-line mashers that I´m going to mount on some 23mm white dish wheels. And a whole bunch of stockparts to replace all those worn out parts.

Will post some pics when he´s all togheter again.

Eyh Manne :) Keeping it up are you? Nice work you've done to the truck!

Sorry about the rc8t news, but its been sitting there for the last 5-6 months now... I'm all about rc planes these days.. But i take it out now and then, just to remind it who's the boss lol.. But nothing really brutal hehe. It still runs strong though..

Heey!

Yeah, thanks alot:party:.

Oh, yeah flying is fun! With and without wings:lol:. I have actually been flying alot of heli lately, but nothing too big, just a 4channel coax, but I really enjoy it.

Good thing you give the rc8t a "reminder" from time to time, so it won´t get old and rusty:whip:, good to hear that it still runs good.

Here is the latest look:

http://cdn04.dayviews.com/100/_u2/_u...70865/edfs.jpg

And here is the latest clip from the gravelpit bashing:
[YOUTUBE]http://www.youtube.com/watch?v=YOaaOtT0-qI[/YOUTUBE]

http://www.youtube.com/watch?v=YOaaO...ature=youtu.be