okI got a short video today. It is not the best but it is not bad.

http://www.rcpics.net/view_single.php?medid=69655

Nice vid, its really quick!

I had the cells un balanced. It did not handle like it usually does. I need to put a couple more cells on it. My 36120 was acting up.

I was running my schulze.

So what was the full set up on that batts, speed control and motor?

yes for that combo. I have to change some thing in the 36120 and it is going to get more cells. I wanted to run more cells but the schulze wouldn't take it.

Hee coolhand I was a little disappointed I thouhgt it had much more power.
Or mabe the video just won't show the right power.
But like I said on that video it looks as fast as your 9XL.
Mabe its just eye swindle?
:C:

But I always like the vids so keep bringing them on.:D

You didn't see it on topspeed mack... it is quick for sure, pity the 36120 is acting up though..

coolhand, if you interested there is a 3060 on ebay :)

It is the 36120 was acting up. I only had 18cells on the truck. The truck is also running a 10.5 to 1 final drive. :D I did get 18 mins of run time on them packs the video was shot on. I had been playing for a bout 5 min when I thought I should get the video. I want to see the motor on 24 cells. :D Yes the truck has more power than my 9xl. It will not wheelie for the center diff. I get the 36120 back on it I have to get another video. I can say. I like driving the truck. It handles excellent. The truck was out of balance in the video to. It had 10 cells one side and 8 on the other.

3060 hmmmm! :D Do you have a number squee?

6021337712

Hmm it would be interesting to see how many amps that thing pulls.. probably over 100?

well coolhand has a 36120 so he should be ok is it doesnt pull a bazillion amps.

The bigger the motor the more torque it has at a certain amp draw. If the 3060 get to a 100 amp draw something is going to give. :D

im betting on the truck....:L: :L:

Heh, you'd need some pretty tough drivetrain parts, imagine that kind of power pulling your e-maxx around, but having your e-maxx snap every single driveshaft at the first pull of the trigger. Are you sure it would be safe on coolhand's controller? I mean, even if it could handle the amps, the truck would probably send a few parts flying, one of which might hit the controller..? :L:

The motor on my truck now is rated ro 50 n/cm of torque at 60 some amps of draw. Run that threw a 10.5 to 1 ratio. The motor is putting 500 n/cm of torque ot the tires. Is this alot of torque. I don't know the metric system well enough to know.

That would be 5.25 N-m of torque. That's about 743 oz.-in. of torque (if I did my math right). Not bad! If the motor pulls more than 60amps (which I am sure it is capable of doing), you could get more torque.

I put my extension back in. I painted up a new body for it. I put a monster gt crowd pleazer 2.0 body on it. It seems to match up very well. Sets pretty low as well.

That body definitely works with that truck. Nice job! :)

Looks very nice wiht that new body on it:D
I also like your wheels

Wen are you making anohter vid?

Coolhand,did you get that problem sorted with the 36120?I got mine today,just wondering what the problem was.


You can definately see glimpses of that torque in the vid.Do we get to see it on 24 cells soon.2250's got to be my next motor i reckon.

Not yet gustav. I am waiting on a program cable. I think it is the parameters in the esc. I find out more when that gets here. I want to try 20 first and then go up from there. I like the new motor that is for sure. It handle alot better with the center diff in it to.

I got the cable in. I changed some parameters. It is not good. I have a problems some where in the system. I was told by a reliable source that it may be my transmitter. It is not compatible with the bk esc. :( Until problem is fixed or figured out. I will be running the schulze for now. I have made up some new 2x13cell (26 cell)packs to test it on to. when problem is fixed they well but put in for a test run. :D

26:eek: YEAH now we are talking:D

Cool rims man:cool: I orderd the same one's;)

Oh this is a PITA! First time I heard of this, actually. I hope you can get this sorted out!

What are the symptpms coolhand? Is it glitching or cogging or what?

It has like a nasty cogg to it. It may be glictching too. I have my therapist working on it with me. :D Hopefully we can get this sorted out. If I know for sure I may sell my futuba and get another brand. Unless I can get it to work right.

You got the Futaba 3PM wheel zender?
never had any problems wiht mine and I drive casoline engine

It is not the controller nor the esc. It is a compatiblity problem. That is my understanding. I find out more later. Fill every one in on the details. Oh well! I got the schulze to run and a couple other trucks. :D

I guess you meant receiver or ESC.

Anybody else here ran a Warrior with a Futaba 3pm??
Horrible feeling here, I have this exact radio comming my way, and I looked forward to this for so long!

damn coolhandcountry!!!
 

When you post an answer you get a response!!!!!

I mean when you post A question!!!!!!!!!!!!!
 

Its the holidays ,,,,,, you know!!!!!!!!!

Yeah!! it sure are the holidays!!

time for some scientific experiments!!

Yeah can't wait rene:C: :C: :C:

@ Dafni,

I run a warrior 9920 with 7XL on my savage with a Futaba T3PDF and I have no problems with extreme cogging.

I'll get a 3PM 27mHz. I hope it works.
Thank you Jasper.

upon further review it is something to do with the truck. I was wondering if it is possible that the magnetic force form the motor and esc mounted to close could cause such problems.

Damn you tried another radio?

I've no idea if the magnet could do that but worth a try i guess.It's some magnet alright and it is very close.Doesn't do it to the schulze though(?)and that's right up to the motor.You could try some shielding in between maybe or zip tie the esc to the shock tower to test.

Good luck.:W:

Well I started a new thread. I hope this may help.
http://www.rc-monster.com/forum/show...&threadid=2047

Well it has been a while since posted here. I went back to a trans on it. I put the gmaxx single speed on flm half case. I modded the 4mm traxxas motor mount to accept the 2250 lehner. It seems to have fixed my cogging problem. It is not fast enough now. Attachment 932

Well the slipper does not seem to want to take the power. It keeps shearing the pins off on the pressure plates. I may have a fix for this later. I have tested it up to 26 cells so far. It is fair on speed with 26 cells. I may try to get a video later on.