RC-Monster Forums
Page 5 of 12 « First 34 5 67 Last »
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   Testing a couple of 1/10 120A ESC (Pictures of the 200A is in here too) (https://www.rc-monster.com/forum/showthread.php?t=15053)

lutach 10.17.2008 08:17 PM
Quote:
Originally Posted by ffactory666 (Post 223563)
That's great to know , what kv is the Aveox RC7 . Trying to work out what rpm you were spinning on 3S as if it's similar to the Orion on 2s i will gear very similar with 19/72, pitty i only have pinions from 22t - 26t i will have to buy a couple more.. 80mph is plenty for me to get started as i haven't gone over 60mph before :oh:

I'll get use to that and how the car needs to be set up and feels and will then try and go faster .
The RC7 motor has a little over 4000Kv. Your 22-26T pinion will be nice :lol:.

ffactory666 10.17.2008 10:15 PM
Quote:
Originally Posted by lutach (Post 223578)
The RC7 motor has a little over 4000Kv. Your 22-26T pinion will be nice :lol:.

Sweet , now to order a car :smile:

BL_RV0 10.17.2008 10:18 PM
What are you going to get? I'd go for a buggy if you don't have one already.

ffactory666 10.18.2008 12:27 AM
Quote:
Originally Posted by BL_RV0 (Post 223641)
What are you going to get? I'd go for a buggy if you don't have one already.
If you look at my sig you can see what buggy and truggy i already have :wink:

I am getting a BMI DB10R pan car for a 2s speed run car .

ffactory666 10.20.2008 04:06 AM
How did you go drag racing on the weekend Luciano?

lutach 10.20.2008 07:22 AM
Quote:
Originally Posted by ffactory666 (Post 224203)
How did you go drag racing on the weekend Luciano?
It was too cold and windy. I couldn't get m drag car and the bike to hook up right. I almost destroyed the bike. It launched straight and then for some reason it went to the left and I couldn't bring it back to the right, so it went off flying. Only damage though was a broken CF wheelie bar. I'm going to wait until summer time now. Plus I might make my own drag bike as I don't like the design of the one I'm running.

lutach 10.20.2008 12:18 PM
Lincpimp,

The sensored ESC got shipped out today so you can test it in the crawler. Please post feedbacks here.

Regards.

ffactory666 10.20.2008 10:56 PM
Quote:
Originally Posted by lutach (Post 224216)
It was too cold and windy. I couldn't get m drag car and the bike to hook up right. I almost destroyed the bike. It launched straight and then for some reason it went to the left and I couldn't bring it back to the right, so it went off flying. Only damage though was a broken CF wheelie bar. I'm going to wait until summer time now. Plus I might make my own drag bike as I don't like the design of the one I'm running.
Sorry about the bike man , it would of been spectacular to capture on video . i didn't even know there was rc drag bikes .
Was looking forward to reports on the 200A esc .

lincpimp 10.20.2008 11:49 PM
Quote:
Originally Posted by lutach (Post 224267)
Lincpimp,

The sensored ESC got shipped out today so you can test it in the crawler. Please post feedbacks here.

Regards.
Sounds good. A little background for everyone else.

I am currently running a novak xrs with a 13.5 motor in my cr-01 tamiya crawler. It is a bit of a fast setup, but it is geared as low as possible, and has very good low speed driveability, plus about 10mph top speed. So it is fun to play with, and plenty capable when crawling.

I would like to run a 21.5 motor on 3s, but want to keep the sensored design. Novak does not make any escs that can handle 3s lipo. I may also try a 17.5 motor as it would have the same rpm on 3s as my 13.5 does on 2s.

I will test the esc to see how it does in the crawler enviorment...

lutach 10.21.2008 07:39 AM
Quote:
Originally Posted by ffactory666 (Post 224493)
Sorry about the bike man , it would of been spectacular to capture on video . i didn't even know there was rc drag bikes .
Was looking forward to reports on the 200A esc .
The bike is ok and I did get it on video. The 200A has proven itself it the previous race. When the weather warms up, I'll be trying to put it in the record books.

lutach 10.21.2008 07:41 AM
Quote:
Originally Posted by lincpimp (Post 224509)
Sounds good. A little background for everyone else.

I am currently running a novak xrs with a 13.5 motor in my cr-01 tamiya crawler. It is a bit of a fast setup, but it is geared as low as possible, and has very good low speed driveability, plus about 10mph top speed. So it is fun to play with, and plenty capable when crawling.

I would like to run a 21.5 motor on 3s, but want to keep the sensored design. Novak does not make any escs that can handle 3s lipo. I may also try a 17.5 motor as it would have the same rpm on 3s as my 13.5 does on 2s.

I will test the esc to see how it does in the crawler enviorment...
Sounds good lincpimp. My sensored ESC will handle 3S lipos and you don't need an external BEC. I used 3S lipos in my drag bike and I used the ESC's BEC and it worked fine.

lutach 10.21.2008 10:10 AM
The drag bike had my own 100A sensored ESC, 5.5T sensored motor and 3S 2200mAh 25C pack. Here are a few pictures of the bike that I raced (Video will be added after it's done processing :lol:):

http://i260.photobucket.com/albums/i...h/DSC01642.jpg
http://i260.photobucket.com/albums/i...h/DSC01643.jpg
http://i260.photobucket.com/albums/i...h/DSC01644.jpg
http://i260.photobucket.com/albums/i...h/DSC01645.jpg

lutach 10.21.2008 10:18 AM
Here is the video:

http://www.youtube.com/watch?v=8VL2U_JgNWc

SunnyHouTX 10.21.2008 12:39 PM
You have PM.

snellemin 10.21.2008 12:41 PM
Nice solid launch man.


All times are GMT -4. The time now is 07:20 AM.
Page 5 of 12 « First 34 5 67 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.