RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   Buyer beware, Fine Design rips off yet again! (https://www.rc-monster.com/forum/showthread.php?t=19500)

Aceldama 03.19.2009 12:23 PM

Quote:

"It works flawless and the speed control holds up to 8s even though its only rated at 25 volts. don't ask me how, but it does."
For $1400, "don't ask me how" doesn't really cut it.
Quote:

Originally Posted by whitrzac (Post 271341)
how does the MM and the tekin R1 take 4-5s lipos???

For not very long? If I'm paying this kind of money for a 'professional brushless conversion' you can bet that I want electronics that were designed to handle the specs that the seller is boasting.

mkrusedc 03.19.2009 01:29 PM

Who would buy crap like that? :slap:

Takedown 03.19.2009 03:10 PM

Quote:

Originally Posted by mkrusedc (Post 271394)
Who would buy crap like that? :slap:

People that are clueless and have cash to spend.

BrianG 03.19.2009 03:35 PM

And then come here when FD won't/can't help them and ask why their stuff broke...

Arct1k 03.19.2009 06:16 PM

in fairness - the esc and motor are very nice - the car is a clone (what do you expect for a 400 car)

The conversion well no question there it could be more "oem" like...

lincpimp 03.19.2009 06:43 PM

Quote:

Originally Posted by Arct1k (Post 271473)
in fairness - the esc and motor are very nice - the car is a clone (what do you expect for a 400 car)

The conversion well no question there it could be more "oem" like...

It does have a nice motors, but i would say that a hv esc would be a much better idea than a boat esc. Plus running 8s on a 6s rated esc is not the best idea for longevity.

I am suprised that he did not use a lower kv neu and run 2 5s packs in series. If a 6s 5000 pack can be made to work, a 10s 3000 pack will provide the same performance. Just makes more sense to me that way...

I was reading one of the baja 5b forums and Jason from maxamps is making a bl baja and he stated that any more than 6s lipo was stupid and not a good idea.... What a dumb ass. I guess that is why maxamps packs are not the best sellers in the large scale air section of the hobby...

As for FD's conversion. Why did he use a bottle cap? Honestly, I could have found something to cover the end that looked more like it belonged there... Some sort of plumbing fitting from lowes. And he should have used black silicone to seal the wires, and applied it with more care. His stuff just looks slapped together...

doo540 03.19.2009 08:08 PM

linc now that was funny, taking a crack at j like that. I've been following his thread on the baja forum too, I was also surprised to see 6s setup on a 25 lb rig. Anyways we will wait and see how it turns out. I also emailed dan (guy on ebay with the bl baja), and I asked what kv the motor was, got the run around for about 3 emails and then was told "a bunch of time went in the R&D of the motor" and he wasn't willing to say what winds it was.

doo540 03.20.2009 07:40 PM

http://www.youtube.com/watch?v=_DqoiNrDJ70
Here is a link to the fine design baja running 6s 4900 lipo 34 mph

Unsullied_Spy 03.20.2009 07:47 PM

Looks like it's got some bottom-end to it, but the top speed is too slow.

Aceldama 03.20.2009 07:55 PM

It looks decent but no faster than a stock 23cc gas powered version... . And a lot less run time... and more expensive... Sure is quiet though!


All times are GMT -4. The time now is 11:37 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.