RC-Monster Forums
Page 6 of 15 « First 45 6 78 Last »
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Castle Creations (https://www.rc-monster.com/forum/forumdisplay.php?f=34)
-   -   MMM v2 Success / Failure Poll (https://www.rc-monster.com/forum/showthread.php?t=14704)

phatmonk 09.07.2008 04:38 PM
Quote:
Originally Posted by JaySki (Post 210151)
#3 just quit. No smoke... Just quit...
Running around the street.. It started to act a bit funny.. where it would be running a little forward and it would kind of act like it braked for a second. Did this a couple times and then quit.

Ironically enough.. this was the first time I set ANY of the ESC settings in Castle Link. I turned punch control to 70% and adjust the throttle curve a little less agressive, and of course the LVC to 12.8V.
Did you check you battery voltage after this happened?

JeffEmbracedDC 09.07.2008 04:50 PM
Quote:
Originally Posted by JaySki (Post 210151)
#3 just quit. No smoke... Just quit...
Running around the street.. It started to act a bit funny.. where it would be running a little forward and it would kind of act like it braked for a second. Did this a couple times and then quit.

Ironically enough.. this was the first time I set ANY of the ESC settings in Castle Link. I turned punch control to 70% and adjust the throttle curve a little less agressive, and of course the LVC to 12.8V.
This is what makes me afraid to change anything.. it's worked so far and I don't wanna eff it up :(

What's the default LVC setting?

-Jeff

phatmonk 09.07.2008 05:05 PM
I run mine with the auto lipo settings.After balancing my voltage on a 4s was 12.4 volt.I heard that the MMM V2 has a software glitch with custom lvc so I have not set a custom lvc cutoff.Go to the CC website to the download page for details.

alangsam 09.07.2008 05:26 PM
i spoke too soon. mmm v2 fried this afternoon
 
mine just stopped working this afternoon. MMM v2 e-revo, 4S, 2770KV motor. 20T 68 spur
motor was hot, wiring warm, fan not on MMM.

going back to castle tomorrow. going to step down to a 2000 kv motor whenever i see the v2 again.

my V1 is still going strong.

JaySki 09.07.2008 07:07 PM
Quote:
Originally Posted by phatmonk (Post 210182)
Did you check you battery voltage after this happened?
Batteries had maybe 5 minutes of use.. Not even enough to warm up the motor over 100.

RBMike 09.07.2008 08:46 PM
I have 3's working V2 now, 2 with more than 1 hour on them & 1 with about 3 hours on it. Out of these, 1 fan broke (blades). I only put 1 good in the poll. No mods.

brushlessboy16 09.07.2008 09:11 PM
Quote:
Originally Posted by RBMike (Post 210250)
I have 3's working V2 now, 2 with more than 1 hour on them & 1 with about 3 hours on it. Out of these, 1 fan broke (blades). I only put 1 good in the poll. No mods.
lucky you\:whistle::na:

e-mike 09.07.2008 09:12 PM
hoooo yes lucky you are:yes:

e-mikey 09.07.2008 09:57 PM
Do you guys think I could get 180.00 shipped for a brand new one? The box was not even opened.

brushlessboy16 09.07.2008 09:58 PM
probably not, retail is 170 or so

e-mikey 09.07.2008 09:58 PM
lol..

"Mamba Monster is here. Finally, a bulletproof Castle controller for MONSTER TRUCKS AND 1/8th Scale Conversions. Is your truck ready?"

e-mikey 09.07.2008 10:01 PM
I'll take 175.00 shipped in the US.

asheck 09.07.2008 10:05 PM
They are 165 shipped on the bay.

e-mikey 09.07.2008 10:08 PM
165 shipped it is..

DRIFT_BUGGY 09.08.2008 05:09 AM
My V1 got a flogging on the weekend and got grass/debris all inside it and still no problems. Fan still works (original fan)

http://www.geocities.com/athowells_r...m/img_2402.jpg


All times are GMT -4. The time now is 08:53 PM.
Page 6 of 15 « First 45 6 78 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.