|
The LST diff housing is an easy modification and cheaper than ordering the hybrid bulks from the US
I get most of my parts from England you know :whistle: |
great looking rig you got there, what esc you using ?
|
I use a 100% waterproof Mtroniks Super E-Truck ESC
With a Novak 4s LVC http://i190.photobucket.com/albums/z...x/HPIM3257.jpg E-Maxx 3906 with Titan 775 and LiPo power |
thanks for the info, just got an emaxx roller but didnt want to turn it into a nickel and dime rig, ill go check on pricing for the speedo since your set-up in the vids seems to run well.
|
Feel free to ask if there is anything you want to know :yes:
|
dont mind if i do. did some searching for the speedo and it seems thats a euro only thing. im gonna do a little more searching since i need a esc that could be used for the titan 775 motor.
|
Quote:
US dealers of Mtroniks LOYALHANNA DOCKYARD 7527 GILBERT ROAD, BERGEN NEW YORK NY 14416 001 585 494-0027 http://www.loyalhannadockyard.com CASWELL PLATING 7696 ROUTE 31, LYONS NEW YORK NY 14489 001 315 946 1213 sales@caswellplating.com SHIPS N' THINGS, INC. 41N. 10TH STREET, MANVILLE NEW JERSEY 08835-1513 001 908 722 0075 http://www.shipsnthings.com CNC MODELS, LLC 620 MARSHALL DRIVE NE LEESBURG VA 20176 703-258-4334 cncmodels@verizon.net http://www.cnc-models.com |
that is way cool, thank you mate
|
Right so I just drove my 3906 after finishing all the bit's n' pieces
And I can honestly say that I REEALYY like it now ...No wheely action ....Well almost :lol: What did I change this time ?? well obviously the chassis rails :yes: and fixed the topshaft (thanks Fred) New rear drive shafts and a longer centre shaft http://i190.photobucket.com/albums/z...e/DSCN0726.jpg but on closer inspection I found a cracked Right Rear bulkhead and a trashed diff cup I had the bulkhead ..bin hiding in my parts box sins 2002 but the diff was worse ....A mate to the rescue He had a spare Revo diff complete with housing and I had a 3905 diff housing http://i190.photobucket.com/albums/z...e/DSCN0725.jpg and after a few hours of tinkering I had my trusty E-Maxx bashing around again http://i190.photobucket.com/albums/z...e/DSCN0730.jpg http://i190.photobucket.com/albums/z...e/DSCN0729.jpg Only thing left to do is paint the body and go play in the dirt :yipi: Morten |
Quote:
You'll never break that little spring pin again with the allen piece in it.:wink: I don't see the LSTdiff case? Fred |
Not yet Fred
They are next on my list, Do you know if other diff's will fit like the Ofna/HoBao, AE or Kyosho ? Morten |
There's only one colour that a Monster Truck needs :yipi:
And That's MUD http://i190.photobucket.com/albums/z...illede019a.jpg http://i190.photobucket.com/albums/z...lede022a-1.jpg http://i190.photobucket.com/albums/z...lede021a-1.jpg http://i190.photobucket.com/albums/z...lede018a-1.jpg http://i190.photobucket.com/albums/z...lede020a-1.jpg Morten |
very nice maxx bud. when are you goin brushless?
|
I have a 2350kv bl motor in my Hyper 7
So I could swab them over at any time http://i190.photobucket.com/albums/z...e/DSCN0411.jpg Don't think I haven't thought about either :lol: Morten |
haha nice man, and yeah i think you should swap! :D
|
| All times are GMT -4. The time now is 07:12 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.