RC-Monster Forums
Page 6 of 10 « First 45 6 78 Last »
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   General Discussion (https://www.rc-monster.com/forum/forumdisplay.php?f=20)
-   -   Pay-It-Forward 2009 (https://www.rc-monster.com/forum/showthread.php?t=17805)

_paralyzed_ 02.05.2009 07:12 PM
double checked that I gave him the right number. I did. Still no pics. Story still has holes. He's still only offering about $20 worth of stuff. I hate this shit.

pedeboi364 02.05.2009 07:12 PM
ok jerry, YGPM on that.

Takedown 02.05.2009 08:39 PM
Tisk tisk.... Thats low pedeboi.:whip:

JERRY2KONE 02.05.2009 09:08 PM
Fired up.
 
Quote:
Originally Posted by _paralyzed_ (Post 259012)
double checked that I gave him the right number. I did. Still no pics. Story still has holes. He's still only offering about $20 worth of stuff. I hate this shit.
Hey there Harold I can see that you are a bit fired up about this to:diablo:, but please take a deep breath and Whhhhooooosssaaaaaaa....:yes: Let it go and calm your crazy butt down old man:lol:. Lets not let this thing ruin a whole day of R/C fun for us. Life is too short:na:. I am sure that he and others have taken all of this in and learned a little something from it:whistle:. I will still see tomorrow come and go, and I am sure that I will still look at the PIF thread as a good thing:party:. Forgive and forget:angel:. It is not worth getting your tighty whities all twisted up in a wad, and not being able to straighten them out over:rofl:. Give the kid a break and let it go. Lets move on to begger and better things. Matt is getting real close to having some of those Maxler chassis in hand. I know you already have yours, but these have been modified and made better still:na::rofl:

BL_RV0 02.05.2009 09:20 PM
Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.

George16 02.06.2009 12:34 AM
[QUOTE=JERRY2KONE;258864]
Quote:
Originally Posted by pedeboi364 (Post 258036)
^^^Holy crap

I can tell you that this is a quick way to get yourself black-balled from any brotherhood. RCM is not a sliesy flea Market, where you pick something up for next to nothing and then turn around and sell it for a huge profit in order to satisfy your bad habits. When we list our stuff in a "Pay it Forward" thread it is so that someone who needs the items gets a chance to acquire them either very cheap, or free for their use. We do not post up our stuff here so that you can jump on them and re-sell them for a profit young man. If you did not need the stuff, then you should not have replied to the post in the first place. I for one am angered and disgusted with your behavior:diablo:. Then you lied in your post on the other site by saying that the tranny had been run like 5 times:rules:. You have no idea what that tranny had been through:oh:. I sent that stuff to you in good faith believing that you needed these items to help upgrade or better your own vehicles. Sure you can do whatever you want once you have them in your possesion, but this was dirty and underhanded, and you should be asshamed of yourself.


I replied to his rctech ad asking if the deans connectors were the same ones you sent to him.

notnodak 02.06.2009 01:32 AM
Quote:
Originally Posted by BL_RV0 (Post 259068)
Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.





I have the two servos from my 3905 .They each need a gear but not the same one. If you want them they're yours. I just need your address again.

mkrusedc 02.06.2009 01:37 AM
Quote:
Originally Posted by JERRY2KONE (Post 258869)
...but I will still accept spare parts for their unfortunate breakdowns and such. I will send you a PM Sir, and thank you for your help with this as we appreciate the RCM support from everyone. I had even just purchased all the parts and built up a new tranny for one of them not knowing that we would be doing a Pay it Forward thread so soon. 2009 is going to be a great year.
I have a set of shock towers and gray 3906 bulks. Those are breakable items for sure. I'll mail this weekend.

Tempted 02.06.2009 03:36 AM
Quote:
Originally Posted by BL_RV0 (Post 259068)
Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.

I've got some arms, hold downs, turnbuckles(might have a full set of 3906, not 3905) and probably enough tranny parts to build a spare 3906 tranny. PM me if you need any of it.

Metallover 02.06.2009 09:06 AM
Pedeboi said he'd send me some 12mm hexes for a few weeks now. I've seen nothing of them. If anyone has an extra pair of 12mm hexes, pm me.

JERRY2KONE 02.06.2009 11:14 AM
Pif is great.
 
Quote:
Originally Posted by Tempted (Post 259192)
I've got some arms, hold downs, turnbuckles(might have a full set of 3906, not 3905) and probably enough tranny parts to build a spare 3906 tranny. PM me if you need any of it.

I will take whatever he does not want for the boys project builds.



I have a set of shock towers and gray 3906 bulks. Those are breakable items for sure. I'll mail this weekend.

Sure thing mkrusedc. I will take them off your hands. I will PM my address.

Modding_out 02.06.2009 11:41 AM
Quote:
Originally Posted by BL_RV0 (Post 259068)
Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.
Hey, BL_RVO. I was going to pif some titans from sjcrss, but I told him you need them more than me.

It's the best I have ''offer'' to the build, you and Jerry snatched up all the maxx parts before I even saw them. LOL

_paralyzed_ 02.06.2009 12:42 PM
Quote:
Originally Posted by Metallover (Post 259222)
Pedeboi said he'd send me some 12mm hexes for a few weeks now. I've seen nothing of them. If anyone has an extra pair of 12mm hexes, pm me.
pm sent, shiny aluminum ones for you!

pedeboi364 02.06.2009 04:40 PM
sry metal, i've only found 1. if u want u can have my alum ones too, ill get some others soon

BL_RV0 02.06.2009 09:47 PM
Quote:
Originally Posted by Tempted (Post 259192)
I've got some arms, hold downs, turnbuckles(might have a full set of 3906, not 3905) and probably enough tranny parts to build a spare 3906 tranny. PM me if you need any of it.
I will take it all!
Shoot me a pm if you need my PP address.
Thanks!

Metallover 02.06.2009 11:22 PM
Quote:
Originally Posted by pedeboi364 (Post 259332)
sry metal, i've only found 1. if u want u can have my alum ones too, ill get some others soon
No Thanks. Harold's got me covered. I don't need any more than that.. Thanks though.

JERRY2KONE 02.06.2009 11:25 PM
Making good.
 
I just wanted to share something with eveyone that Pedeboi is making good on things. Look I don't think he wanted to make things bad for anyone. It was just a young mistake, and now he has offered to send the tranny back to me. Of course I really do not need it, but I just found out about someone who really wants and needs it and has for a very long time. So he will send it to Paralyzed for one of his projects as his "Pay It Forward" gesture, and making good on his mistake. All is good in the RCM world. I hope that this will calm everyone down a bit now, and we can move on to bigger and better things. "Can't We All Just Get Along" comes to mind. I know I am happy now. Have a great day Gentlemen.

notnodak 02.07.2009 01:28 PM
I have 6 different noise eliminators I'll offer up. You wrap your esc lead around one a few times up close to the RX and it helps with radio interference on brushless with non/DSM radios.

Krawlin 02.07.2009 03:11 PM
Would anyone happen to have some spare plastic 66 tooth 3906 E-Maxx plastic spur gears, or preferably a steel 66 tooth spur gear setup?

My Medusa 36-80 shaved the teeth off my only remaining 66 tooth spur gear...

Metallover 02.07.2009 03:12 PM
I've got a need for an old set wheels mainly for testing. I want something 10th scale size or maybe a little bigger with a 12mm or 14mm hex to test on my crt .5. The truck has an outrunner so tire size is the only way to test gearing. I don't want to plunge right in and buy a new set of $50 tires just to find out my system runs too hot on that...

If anyone could help me out that would be great.

BL_RV0 02.07.2009 03:18 PM
Riley- ebay has some cheap 1/10 wheel sets, can be had for $30ish

_paralyzed_ 02.07.2009 04:24 PM
Quote:
Originally Posted by Metallover (Post 259583)
I've got a need for an old set wheels mainly for testing. I want something 10th scale size or maybe a little bigger with a 12mm or 14mm hex to test on my crt .5. The truck has an outrunner so tire size is the only way to test gearing. I don't want to plunge right in and buy a new set of $50 tires just to find out my system runs too hot on that...

If anyone could help me out that would be great.
i've got old school t-maxx wheels. could send them with the hexes?

BL_RV0 02.07.2009 04:35 PM
Quote:
Originally Posted by Krawlin (Post 259582)
Would anyone happen to have some spare plastic 66 tooth 3906 E-Maxx plastic spur gears, or preferably a steel 66 tooth spur gear setup?

My Medusa 36-80 shaved the teeth off my only remaining 66 tooth spur gear...
I have a new 62t plastic emaxx spur gear. Want it?

Metallover 02.07.2009 05:06 PM
Quote:
Originally Posted by _paralyzed_ (Post 259604)
i've got old school t-maxx wheels. could send them with the hexes?
What's the diameter of those wheels? I'd probably be interested.

BL_RV0 02.07.2009 05:13 PM
3.2"

_paralyzed_ 02.07.2009 05:25 PM
Quote:
Originally Posted by BL_RV0 (Post 259612)
3.2"
me thinks he means outside, not inside

Metallover 02.07.2009 05:25 PM
I need the measure with tires. The maxx wheels have tires, right? My stock .5 wheels are 3.2"

The maxx wheels are 3.8", right? I think the confusion came in where the rims are 3.2, and the pic on tower shows wheels and tires.

notnodak 02.07.2009 05:55 PM
Metallover gets one RF filter. I'll send Monday.

Krawlin 02.08.2009 12:48 PM
Quote:
Originally Posted by BL_RV0 (Post 259605)
I have a new 62t plastic emaxx spur gear. Want it?
Thanks for the offer but no thanks, not enough teeth. Gotta have a 66 tooth.

Takedown 02.08.2009 12:51 PM
Quote:
Originally Posted by Krawlin (Post 259916)
Thanks for the offer but no thanks, too small. Gotta have a 66 tooth.
Thats what she said.:wink:

Krawlin 02.08.2009 01:00 PM
Quote:
Originally Posted by Takedown (Post 259918)
Thats what she said.:wink:
You're one to talk Ryan.....

rawfuls 02.08.2009 01:11 PM
OUCH Dissed, need some ointment for that BURNNN?

:D

pedeboi364 02.08.2009 01:53 PM
^^ I don't think thats enough, sum1 call the fire department!!

lincpimp 02.08.2009 02:40 PM
Quote:
Originally Posted by Takedown (Post 259918)
Thats what she said.:wink:
Quote:
Originally Posted by Krawlin (Post 259921)
You're one to talk Ryan.....
I am guessing Krawlin and TD know each other "personally"....

Too easy guys, better luck next time...

magman 02.08.2009 02:51 PM
Quote:
Originally Posted by Krawlin (Post 259916)
Thanks for the offer but no thanks, not enough teeth. Gotta have a 66 tooth.
I have a 66 tooth Kimbrough spur out of my old t-maxx 2.5 brand new if you would like it....if it would work for your application. If it will, pm me your address and I will ship it to you asap.

Brian

Krawlin 02.08.2009 02:55 PM
Quote:
Originally Posted by lincpimp (Post 259942)
I am guessing Krawlin and TD know each other "personally"....

Too easy guys, better luck next time...

Thankfully not.....

Quote:
Originally Posted by magman (Post 259944)
I have a 66 tooth Kimbrough spur out of my old t-maxx 2.5 brand new if you would like it....if it would work for your application. If it will, pm me your address and I will ship it to you asap.

Brian
Does the T-Maxx use the same 32 pitch/Mod.8 spur gears as the E-Maxx?

bigboi146 02.08.2009 02:56 PM
Yes the t-maxx does use 38p gears.

Krawlin 02.08.2009 03:03 PM
Quote:
Originally Posted by bigboi146 (Post 259946)
Yes the t-maxx does use 38p gears.
Thanks!

_paralyzed_ 02.08.2009 03:33 PM
Quote:
Originally Posted by bigboi146 (Post 259946)
Yes the t-maxx does use 38p gears.
yes, 32 pitch/mod .8 gears for both trucks mentioned

sjcrss 02.09.2009 04:53 PM
Well I figured I would ask if anyone has a spare one of these laying around
i need a 6" servo extension, because I moved my Dimension engineering Park bec, and need to ext. the lead to reach the rx..... so af anyone has one kicking around, I'll pay shipping if need be.
Thanks


All times are GMT -4. The time now is 09:11 PM.
Page 6 of 10 « First 45 6 78 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.