RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   HPI Savage (https://www.rc-monster.com/forum/forumdisplay.php?f=30)
-   -   I Am Back (https://www.rc-monster.com/forum/showthread.php?t=1131)

toby 09.04.2005 03:26 PM

i ordered the motor today.
i ordered a radio box
i have ordered FLM tvps


Serum thanks for your help so far man, same to you dafni. i have not had much luck sellign anything yet though. i need some funds. i am going to experiment with the motor mount for a while and probably make a few. I need a gp 3300 cell just a single to make a battery tray and my LHS does not have any. If anyone can send me one, rather it dead or not, i will pay for it.

Serum 09.04.2005 03:31 PM

If you have got the sizes, you could make one from wrapped paper.. 42 x 22 mm these are the sizes, you need to know that the connection bars must be added as well.

Why did you ordered a radio box? you had one? (just curious)

i heard FLM is making a LowCG tvp as well.. i like their tvp's they are BEEFY!

toby 09.05.2005 10:53 AM

would 16 cells that are matched make it wheelie on command? should i look into the three speed as well? Well i made 35 dollars so far. YAY.

Does anyone know where i can get some silver skids. rather it be ti or aluminum? i need them to go with the theme. i sold my purple ones

squeeforever 09.05.2005 11:15 AM

honestly to save money you should have kept them and stripped the anodizing off and polished them or put a brushed finish on them.

toby 09.05.2005 12:31 PM

how do you remove anodzie. i have not quite sold them, i do not have the money yet.

Serum 09.05.2005 12:50 PM

here you go, you searchbutton freak... ;)

toby 09.05.2005 01:11 PM

thanks serum. I have been called Worse LOL.

Rcbros 09.05.2005 01:16 PM

Here a how-to I did on removing anodization http://www.rcbros.com/forum/forum_posts.asp?TID=801

toby 09.05.2005 01:17 PM

thanks. i am going to try it this coming weekend. It will work good. for my fegaio i might put a carbon fiber sticker around it. i have seen it on a mamba and it looked good

Rcbros 09.05.2005 01:26 PM

I'd highly highly be careful removing it from the feigao. I did it to mine and thought I was safe. But turns out some got inside and melted the glue and ruined the motor.

toby 09.05.2005 01:27 PM

i am doing it to my skids like the one guy suggested to save me money. i need to spend money on something else. I am going to buy the spektrum radio once i sell my lynx 3d and some other stuff.

toby 09.05.2005 02:35 PM

When i sell the powerstrokes or wasp .28 or both i am going to buy the controller.

These are two questions that i would like to be answered

Should i get the spektrum radio if i am not racin?
should i get a 3 speed

I also found really really beefy dogbones for the driveshaft. they were 40 dollars though. here is the link
http://www.rcalloys.com/pricelist/pricelistsavage.html

toby 09.06.2005 07:47 PM

first i know i am not suppose to triple post and i apologize.

I wanted to edit a post but it did not let me do it cause i am too late so please do not get mad.

I sold 77 dollars worth of stuff so i am making money for my controller. once i buy that than i am set to start everything. Can someone please answer my last questions?

Also- i just started thinking, i am not to smart with electric stuff. How does break reverse and all of that work? will i not have reverse? or only forward?

coolhandcountry 09.06.2005 08:18 PM

I think the 3 speed was for nitro and uses the clutch bell. If you have away to hook this up on the electric is the question. If you run the two speed. I would guess you won't have reverse. Unless you hook the reverse shifter up and run it like the nitro. If you know what I;m talking about.

toby 09.06.2005 08:19 PM

o i forgot the savage does not have reverse


All times are GMT -4. The time now is 05:23 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.