RC-Monster Forums
Page 7 of 13 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   My Maxx Kicks Your Maxx's Ass Build (https://www.rc-monster.com/forum/showthread.php?t=17884)

brushlessboy16 01.11.2009 12:30 PM
Quote:
Originally Posted by t-maxxracer32 (Post 251155)
you could always get 6.5 bullet connectors. they will spark just like any others, but they will probably have the least amount of resistance compared to any other connector.
except these http://www.hobbycity.com/hobbycity/s...idProduct=6580

8mm!:surprised:

t-maxxracer32 01.11.2009 12:42 PM
lol damn.

did not even know they made those.

i have a had enough time soldeing the 6.5s i wouldnt even wanna mess with those

Krawlin 01.11.2009 01:00 PM
Quote:
Originally Posted by t-maxxracer32 (Post 251155)
you could always get 6.5 bullet connectors. they will spark just like any others, but they will probably have the least amount of resistance compared to any other connector.
Problem with that is I have no plastic case to put them in to keep them from touching and shorting.

brushlessboy16 01.11.2009 01:02 PM
Quote:
Originally Posted by Krawlin (Post 251163)
Problem with that is I have no plastic case to put them in to keep them from touching and shorting.
heatshrink.

Krawlin 01.11.2009 01:54 PM
Quote:
Originally Posted by brushlessboy16 (Post 251165)
heatshrink.
That doesn't do anything for the male bullet connectors... They are still exposed. I think I will just break down and spend the money on EC5's.

brushlessboy16 01.11.2009 02:35 PM
Quote:
Originally Posted by Krawlin (Post 251173)
That doesn't do anything for the male bullet connectors... They are still exposed. I think I will just break down and spend the money on EC5's.
male bullets would be on the esc... so heat shrink the soldered end and you will be fine

Krawlin 01.11.2009 02:40 PM
Quote:
Originally Posted by brushlessboy16 (Post 251181)
male bullets would be on the esc... so heat shrink the soldered end and you will be fine
True. I will just go with the EC5's.

Krawlin 01.12.2009 09:04 PM
I am going to be ordering my EC5's tonight.

traxxasbasher13 01.12.2009 09:07 PM
Cool.

Krawlin 01.12.2009 09:26 PM
Hopefully that will fix this problem and I can actually enjoy driving this thing. If new connectors doesn't solve the problem, time for an MMM.

traxxasbasher13 01.12.2009 09:28 PM
Yea...I hope my Mamba Max can handle a 80mm on 4s. It should do ok though because I have a huge cap and a bec.

Krawlin 01.12.2009 11:50 PM
Quote:
Originally Posted by traxxasbasher13 (Post 251586)
Yea...I hope my Mamba Max can handle a 80mm on 4s. It should do ok though because I have a huge cap and a bec.
I tried using a cap board (6 caps) with my MM and it still did the on off thing. Maybe it is just my connectors though. Just ordered some EC5's, should have them by Wednesday or Thursday.

traxxasbasher13 01.12.2009 11:52 PM
Wow 6 caps thats a lot lol.

BL_RV0 01.13.2009 12:20 AM
I suggest you sell the MM while it is still alive and invest in a MMM- you won't regret it.

_paralyzed_ 01.13.2009 11:36 AM
Quote:
Originally Posted by Krawlin (Post 251620)
I tried using a cap board (6 caps) with my MM and it still did the on off thing. Maybe it is just my connectors though. Just ordered some EC5's, should have them by Wednesday or Thursday.
it is your connectors, i told you that already, silly:rofl:


All times are GMT -4. The time now is 08:09 AM.
Page 7 of 13 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.