Sort of looks like it has a very slight bend. I think it could use a chassis stiffener or support that runs the length of the chassis.

Also, I've seen bodies that cover the entire chassis, like this:

http://rc-racing.no/images/detailed_...3bf8a18fff.jpg

Is it a specific body that's like that, or a specific undertray? I also noticed your undertray is different than this:

http://rc-racing.no/images/detailed_...0Undertray.jpg

Also, very nice job on this. Looks very good.

I realized that after putting it on, Its only got one screw holding it on at this point as I ran out of nuts.
I'll be swaping it around so its rite.

I think I may have my camera on some fish eye setting or something.
The chassis is just as straight as the day I cut it out from checking with a straight edge.
Even the shelf behind it has a bent look to it lol.
After testing I had done with the first chassis I had cut out, I don't think additional bracing is needed.
I propped it up on each end and bounced on one foot on the center of first failed chassis and it hardly even flexed with my 210lbs bouncing on it on one foot putting full weight + on it

OK today I got off my duff and got to it, for a little while lol

Got the battery trays / chassis bracing in place, Lowered the roll cage and moved it back just a little and flipped around the
chassis skid / side panel mounts so its in the rite direction.

This sure changed its looks.

http://i764.photobucket.com/albums/x...2/DSCF3014.jpg

Still need to cut slots for battery straps and make some stops so packs cant move around,
then pad everything a pack can touch.

http://i764.photobucket.com/albums/x...2/DSCF3015.jpg

http://i764.photobucket.com/albums/x...2/DSCF3016.jpg

3s packs will fit great and when its done will be well protected.

http://i764.photobucket.com/albums/x...2/DSCF3017.jpg

I think it makes it look much better without the big empty space that was there before.\

http://i764.photobucket.com/albums/x...2/DSCF3019.jpg

I think its becoming quite a rig, just need to get that center shaft made and it should be in OMG status.

http://i764.photobucket.com/albums/x...2/DSCF3021.jpg

Looks great with the body!!

I may have missed it, but what's your plan for the front dog bone?

I need to have a center shaft made up some where.
Its the next thing I really want to get done.

Let me know where you get it done, I'll probably need one for a project later this year.

U can probably try the yes flux 5t driveshaft its 12" long!

Nice mate it's looking really good hey coming along well.

I need to get an accurate measurement but that may be close.
Got a link?

Thanks man, yours was the inspiration even tho its gone in a different direction (trying to make it my own design) yours was the one I saw that made me want to build one.
I'm so happy I did, I don't miss the muggy one bit :mdr:

Tonight I got the rest of the battery trays finished, all that is left to do is pad them, cut slots for straps, and get straps lol

http://i764.photobucket.com/albums/x...2/DSCF3023.jpg

http://i764.photobucket.com/albums/x...2/DSCF3024.jpg

http://i764.photobucket.com/albums/x...2/DSCF3025.jpg

Also mounted side windows I made, hated to use zipties but after I tint them they wont be as noticeable.

http://i764.photobucket.com/albums/x...2/DSCF3033.jpg

They tilt up for battery access.

http://i764.photobucket.com/albums/x...2/DSCF3036.jpg

One large Walmart cake from a full set of windows lol

http://i764.photobucket.com/albums/x...2/DSCF3040.jpg

Well figured I'd put a little time in it after work today, got the front shocks rebuilt with the shorter Muggy shafts.
Then put on the Muggy shock tower.

Front shocks have a nice angle to them now.

http://i764.photobucket.com/albums/x...2/DSCF3056.jpg

http://i764.photobucket.com/albums/x...2/DSCF3055.jpg

http://i764.photobucket.com/albums/x...2/DSCF3066.jpg

Also don't know if anyone had noticed but I had done the rear shock swap so it would look more buggy like.

http://i764.photobucket.com/albums/x...2/DSCF3058.jpg

http://i764.photobucket.com/albums/x...2/DSCF3059.jpg

I must say I am really enjoying this build.

awesome project ....... we waiting vids in a tt circuit ;)

5BMuggy update :D

Battery boxes all padded.

http://i764.photobucket.com/albums/x...2/DSCF3186.jpg

Moved esc and receiver to their new homes.

http://i764.photobucket.com/albums/x...2/DSCF3185.jpg

http://i764.photobucket.com/albums/x...2/DSCF3184.jpg

http://i764.photobucket.com/albums/x...2/DSCF3181.jpg

http://i764.photobucket.com/albums/x...2/DSCF3177.jpg

Much cleaner look I think.

This thing is awesome! I really wish I had the time and resources (Money) to build something like this. Great job on everything!

if u haven't fount an alternative front driveshaft heres the 12" one i was talking about a month ago only 15$ from tcs: http://www.tcscrawlers.com/TCS-Crawl...t-p-17903.html
sorry about the delay